Re: bge problems in RELENG_9, bge0: watchdog timeout -- resetting

On Thu, 2012-07-12 at 14:59 -0700, YongHyeon PYUN wrote:
I grabbed these updates and applied them cleanly to stable/9 on a
Dell
R620 with a quad port BCM5720, I still see watchdog timeouts and
reset
indications. I am able to ping out of the box for a short amount of
time before the device hangs and times out.


Sean, sorry for late reply.
Given that I have no problems on sample 5720 controller I still
have no clue yet.


No problems ... :-)



-bash-4.2# ping XXX.XXX.XXX.1
PING XXX.XXX.XXX.1 (XXX.XXX.XXX.XXX): 56 data bytes
ping: sendto: Network is down
ping: sendto: Network is down
ping: sendto: Network is down
ping: sendto: Network is down
ping: sendto: Network is down
Jul 9 17:31:41 <kern.crit> x89 kernel: bge2: watchdog timeout --
resetting
Jul 9 17:31:41 <kern.notice> x89 kernel: bge2: link state changed
to
DOWN
Jul 9 17:31:41 <kern.notice> x89 kernel: bge2: link state changed
to

Two link state change message indicates there is an issue in state
tracking. I'm experimenting a different approach but it seems it
takes too long due to lack of time. Any way, I've uploaded updated
bge(4)(URL is the same as before).

I see a bunch of firmware updates for this host along with an update to
the BCM firmware package for this Dell box.

I'll update my system's driver first, validate pass/fail, if fail, then
I'll update the firmware bits and validate some more.

sean

_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages