[HPADM] Summary: C110 and memory

From: Silvio Cesar Lima (silcesar_at_hotmail.com)
Date: 05/13/03

  • Next message: Julius Szelagiewicz: "[HPADM] [HPUX] Connecting through 2 ISPs"
    To: hpux-admin@dutchworks.nl
    Date: Tue, 13 May 2003 17:54:33 +0000
    
    

    Hi,

    Thansk for everybody that help me.

    "
    >All the available memory slots are on the motherboard.
    If you have less than four memory modules, the slots should be populated in
    order (first A, then B, etc.).

    >The C110 manuals can all be found here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentTy
    pe=SupportManual&docIndexId=120929&locale=en_US&prodTypeId=12454&prodSeries
    Id=44429

    >The C110 will accept eight total memory boards, but they MUST be installed
    as matched pairs. If one or more boards are mismatched or bad, the system
    will deallocate them. Follow the guidelines in the manual for proper
    installation. Note: from years of experience with that class of hardware
    I'll warn you that you need to make sure the slots are clean & dust free,
    and the boards are completely seated and making good contact. I've learned
    to snap each board in and out several times, especially when using slots
    that have been unused for a long period of time.

    >The C110 is rather trickey, but it SHOULD accept 8 modules of (64M) of
    memory, as long as you correctly put them in pairs.

    >The slots go 0A 2A 0B 2B space 1A 3A 1B 3B
    and you have to use them in numerical order, each A/B pair MUST be
    identical memory models.

    >So 4 modules should be in 0A 0B and 1A 1B, etc.
    Highest values modules should be in lowest numbers and the machine
    ONLY accepts 16 MB and 64 MB modules, no others.

    > Is there any jumper on motherboard ?

    >No, there is not. The manual (Model C100/110 Owner's Guide) says:
    Memory modules MUST be installed in pairs of equal capacity.
    Always install largest capacity memory modules in the lowest numbered
    slots.
    Memory slots must be filled in order from 0A and 0B through 3A and 3B.
                                                                    "

    Silvio Cesar De Lima
    e-mail: silcesar@hotmail.com

    _________________________________________________________________
    MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com

    --
                 ---> Please post QUESTIONS and SUMMARIES only!! <---
            To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
           Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
     
     Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
                http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)
    

  • Next message: Julius Szelagiewicz: "[HPADM] [HPUX] Connecting through 2 ISPs"