[HPADM] Dual nics on two networks

From: Joseph Wright (JWRIGHT_at_mbakercorp.com)
Date: 06/05/03

  • Next message: Joseph Wright: "[HPADM] Re: Dual nics on two networks" 
    Date: Thu, 05 Jun 2003 09:52:55 -0400
To: <hpux-admin@dutchworks.nl>

    I am trying to get my second NIC to communicate with my local network. I have lan0 setup on my 192.168 network along with a default route which works great. I have also added a second nic on the 172.16 network. The lan1 nic can not reach anything on the same network. An example is trying to get to 172.16.42.1. I am sure this a simple routing issue. (I included netconf and a netstat -r below)

    thanks

    --Netconf--
    INTERFACE_NAME[0]=lan0
    IP_ADDRESS[0]=192.168.200.200
    SUBNET_MASK[0]=255.255.255.0
    BROADCAST_ADDRESS[0]=""
    INTERFACE_STATE[0]=up
    DHCP_ENABLE[0]=0

    INTERFACE_NAME[1]=lan1
    IP_ADDRESS[1]=172.16.42.12
    SUBNET_MASK[1]=255.255.255.0
    BROADCAST_ADDRESS[1]=""
    INTERFACE_STATE[1]=up
    DHCP_ENABLE[1]=0

    GATED=0
    GATED_ARGS=""

    RDPD=0
    RARP=0

    ROUTE_GATEWAY[0]=192.168.200.254
    ROUTE_COUNT[0]=1
    ROUTE_DESTINATION[0]=default
    LANCONFIG_ARGS[0]=ether

    root@hp9k> netstat -r
    Routing tables
    Destination Gateway Flags Refs Interface Pmtu
    localhost localhost UH 0 lo0 4136
    172.16.42.12 172.16.42.12 UH 0 lan1 4136
    hp9k hp9k UH 0 lan0 4136
    192.168.200.0 hp9k U 2 lan0 1500
    172.16.42.0 172.16.42.12 U 2 lan1 1500
    127.0.0.0 localhost U 0 lo0 0
    default 192.168.200.254 UG 0 lan0 0 

    --
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)
  • Next message: Joseph Wright: "[HPADM] Re: Dual nics on two networks"