[HPADM] Ignite error

From: Stig Eriksson (stig_at_cactus.se)
Date: 03/12/04

  • Next message: Balaji Nathan: "[HPADM] VA 7100 log files under /var/opt/sanmgr/commandview/server/logs/performance" 
    To: hpux-admin@dutchworks.nl (HP Admin mailing list)
Date: Fri, 12 Mar 104 12:48:19 +0100 (MET)

    Hi everybody:

    I am trying clone my system using Ignite B.5.1.33
    I made a bootable tape by using make_tape_recovery -x inc_entire=vg00

    Then i booted from this tape on my second system, and after reading
    the tape and during reboot, i get this:

      Volume group "/dev/vg00" has been successfully changed.
      Resynchronized volume group /dev/vg00
      ERROR: "/tmp/ign_configure/config.full", line 115: syntax error
      ERROR: Problem were encountered while parsing config file:
              "/tmp/ign_configure/config.full".
      ERROR: configure: Parser returned failure on: /tmp/ign_configure/config.full

    The file in question (config.full) seems ok to me:

      #
      # System/Networking Parameters
      #
      _hp_custom_sys+={"Current System Parameters"}
      init _hp_custom_sys="Current System Parameters"
      _hp_custom_sys visible_if TRUE
      _hp_custom_sys help_text "System/Networking Info"
      (_hp_custom_sys=="Current System Parameters") {
              final system_name="hlm1"
              final ip_addr[]="192.168.15.41"
              final netmask[]="0xffffff00"
              final broadcast_addr[]="192.168.15.255"
              final route_gateway[0]="192.168.15.1"
              final route_destination[0]="default"
              final route_count[0]=1
              TIMEZONE="MET-1METDST"
              is_net_info_temporary=FALSE
      } # end "Current System Parameters"

      hw_instance_num = 10 "ioa" "sba" 0
      hw_instance_num += 10/0 "ba" "lba" 0
      hw_instance_num += 10/0/12/0 "lan" "btlan3" 0
      .

    ... and so on, where line 115 is the first "hw_instance_num" line.

    Any ideas anyone?

    Best Regards 

    --
Stig Eriksson                    email: se@cactus.se
Cactus Automation AB             phone: +46 31 86 97 10
Krokslatts Fabriker 30           fax:   +46 31 86 97 24
431 37  Molndal                  http:  www.cactus.se
--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)
  • Next message: Balaji Nathan: "[HPADM] VA 7100 log files under /var/opt/sanmgr/commandview/server/logs/performance"

    Relevant Pages

    • Re: Remote mksysb
      ... > is there any way to create a bootable tape from one AIX (is out of ... > reach) to another so that one could create the tape and if needed drive ... What about directing your mksysb back to a NIM server, ...
      (comp.unix.aix)
    • Re: whats the best way...?
      ... It's a image of a bootable tape created from unix using probably dd. ... This hole thing would be so much easier if vms could read ufs ... Other file formats may prove more of a problem. ...
      (comp.sys.dec)
    • Re: AIX 4.3.3 System Restore Failure
      ... >> I thought that this was a bootable tape. ... > The smit backup just copies the selected files to the tape. ... A good thought about the boot tape without files? ...
      (comp.unix.aix)
    • Re: Sun 4.1e Restore Procedure Help
      ... Construct a bootable tape from a running operating system ... The proper tape boot ... copy them system from disk to disk? ...
      (comp.sys.sun.admin)