[HPADM] SUMMARY problem with fsadm
From: Harm Ensing (ensin001_at_hdxh0e.unix.telecom.ptt.nl)
Date: 04/09/04
- Previous message: Timothy A Reed: "[HPADM] upgrade 11.0 to 11.i install times"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: hpux-admin@DutchWorks.nl Date: Fri, 9 Apr 2004 11:52:27 +0200 (METDST)
Here's the summary of replies I got to this guestion/problem:
> I'm having trouble with the fsadm command while trying to extend a filesystem.
>
> The filesystem is mounted:
> # mount|grep lvol9
> /volumes/v1 on /dev/vg00/lvol9 delaylog,nodatainlog on Sun Mar 14 18:29:00 2004
>
> and apparantly it is type vxfs:
> # grep lvol9 /etc/fstab
> /dev/vg00/lvol9 /volumes/v1 vxfs delaylog 0 2
> # fsadm -F vxfs -D /volumes/tsu
> Directory Fragmentation Report
> Dirs Total Immed Immeds Dirs to Blocks to
> Searched Blocks Dirs to Add Reduce Reduce
> total 334 342 238 0 2 12
>
> The logical volume has been extended:
> # bdf /volumes/v1
> Filesystem kbytes used avail %used Mounted on
> /dev/vg00/lvol9 1048576 761154 270359 74% /volumes/v1
> # vgdisplay -v vg00
> .....
> LV Name /dev/vg00/lvol9
> LV Status available/syncd
> LV Size (Mbytes) 3000
> Current LE 750
> Allocated PE 1500
> Used PV 6
>
> But when I use fsadm to extend the filesystem to the full size it fails:
> # fsadm -F vxfs -b 3072000 /volumes/v1
> fsadm: the -b option requires "HP OnLineJFS (Advanced Vxfs)"
>
> Our first thought was that the VxFS package had not been installed, but:
> # swlist|grep -i vxfs
> B3929BA B.11.00 HP OnLineJFS (Advanced VxFS)
>
> And on similar systems we have done this several times without problems.
>
> What am I overlooking?
Thanks to:
James Lonski
David R Antoch
Kevin O'Donovan
Bryan.Quinn
Stuart Abramson
Bruno HAUTECOEUR
Craig E Johnson
These are the suggestions:
Re-install Online-JFS. By toggling the options a bit it should be possible to
re-install an re-activate the license without needing to reboot.
There was mention of a line in /etc/inittab :
vxen::bootwait:/sbin/fs/vxfs/vxenablef -a
But I don't have this (vxenablef) on my systems so I don't really know
what to think of this.
Look at which 'fsadm' program is physically used. There are several on the system but this helped me no further.
There was a reference to a "vxlicense -c" command but I don't have this on my system. Neither does a license "enable" comamnd exist.
A reference to an ITRC file helped me a lot further.
SAM told me that the driver was 'OUT'.
( SAM => Kernel Config => Drivers => vxadv - Current State )
Setting it to 'IN' would result in creating a new kernel and reboot
which I haven't done yet.
So it appears that I do not have the extra cost Online JFS package installed properly and so cannot extend the filesystem with fsadm. I will have to (re-)install and reboot or unmount the filesystem, enlarge it with lvextend and then reorganize the filesystem with extendfs.
-Harm-
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
- Previous message: Timothy A Reed: "[HPADM] upgrade 11.0 to 11.i install times"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
