[HPADM] RE: -SUMMARY- NAT (Network Address Translation) on HP-UX 1 1.0 or 11.11

From: Naylor, Jim (Jnaylor_at_Schnucks.com)
Date: 02/17/05

  • Next message: Naylor, Jim: "[HPADM] Symbol not found" 
    To: "Hpux-Admin@Dutchworks. Nl (E-mail)" <hpux-admin@dutchworks.nl>
Date: Thu, 17 Feb 2005 08:22:49 -0600

    Once again thanks to all. Most people suggested to use IPFILTER.
    ipf (ip filter) is your friend. It is supported and works perfectly
    if you use a version that is newer than 15 months. Get it from

    http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumbe
    r=B9901AA

    http://software.hp.com .

    Thanks,
    Jim Naylor
    Unix/Storage Systems Administrator
    Schnuck Markets, Inc.
    * Direct (314) 994-4784
    ))( Cell (314) 691-0186
          Fax (314) 994-4684
    * E-Mail jnaylor@schnucks.com

    -----Original Message-----
    From: Naylor, Jim
    Sent: Wednesday, February 16, 2005 8:42 AM
    To: Hpux-Admin@Dutchworks. Nl (E-mail)
    Subject: [HPADM] NAT (Network Address Translation) on HP-UX 11.0 or
    11.11

    Good Day All,
    I search the archives and saw similar postings but no resolution. Is it
    possible to do NAT on HP-UX? our internal address scheme is 10.0.x.x and we
    need to translate this to a class C address to send stuff to a Banking
    facility.

    Thanks,
    Jim Naylor
    Unix/Storage Systems Administrator
    Schnuck Markets, Inc.
    * Direct (314) 994-4784
    ))( Cell (314) 691-0186
          Fax (314) 994-4684
    * E-Mail jnaylor@schnucks.com 

    --
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact
majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner:
owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse
only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse &
search)
--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)
  • Next message: Naylor, Jim: "[HPADM] Symbol not found"

    Relevant Pages

    • Re: iptables: fake ip using DNAT and SNAT
      ... :I.e, the application receieves the real source address, so the ... the "ip rule add nat" command reports to be deprecated. ... what bothers me is why packets arriving via ... You can force the translation on machine A by routing packets out the ...
      (comp.os.linux.networking)
    • [HPADM] SUMMARY: PGP For Commercial Use
      ... We are looking for a PGP Solution for HP-UX that is licensed for commercial ... RSA Public Key, ... To subscribe/unsubscribe to this list, ...
      (HP-UX-Admin)
    • Re: Linux v Dedicated NAT routers - secure remote differences
      ... > NAT After IPSec ... > one-to-one address translation occurs it will ... I don't think this is the case - it was reported to me that my packets had ... This scenario is possible because ESP does not use the IP ...
      (comp.security.firewalls)
    • Re: NAT Multicast question
      ... Actually you should not need to use NAT to translate 172.24.2.34 to ... specified by the ACL or route map or the static translation) will be ... all you need is an ACL that has ... dynamic translation using ACLs or route maps. ...
      (comp.dcom.sys.cisco)
    • Re: NAT & BINAT !! Help!!!
      ... it doesn't do what you intend. ... .28 and those in table freeout. ... The first matching translation rule is used, ... binat has precedence over nat (and ...
      (comp.unix.bsd.openbsd.misc)