[HPADM] RE: NIC Duplex Settings

From: Roger Realsen (roger.realsen_at_wareforce.com)
Date: 04/06/05

  • Next message: Roger Realsen: "[HPADM] [SUMMARY]: NIC Duplex Settings" 
    To: hpux-admin@dutchworks.nl
Date: Wed, 6 Apr 2005 10:21:20 -0700

    Thanks to all who replied thus far. I think I am finding that I may not
    have the ability to view/change this setting.

    Here is a lanscan:
    # lanscan
    Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
    Path Address In# State NamePPA ID Type Support Mjr#
    8/16/6 0x080009E7C49E 0 UP lan0 snap0 1 ETHER Yes 119

    When I then take that info and do "lanadmin -x 0" I get:
    # lanadmin -x 0
    Error: This option is not supported for this hardware.

    Here are the files in my /etc/rc.config.d directory. Looking at the files I
    think are for the NIC card, they are all empty.
    # cd /etc/rc.config.d
    # lsf
    LANG cron list_mode pwgr
    Rpcd dce lp savecrash
    SnmpHpunix desktop mailservs set_date
    SnmpMaster diagnostic* namesvrs slsd*
    SnmpMib2 ems nddconf supprtinfo
    SnmpTrpDst emsagtconf netconf swconfig
    acct envd netdaemons syncer
    audio* hparamgr* nettl syslogd*
    auditing hparray nfsconf* tps
    cde hpbase100conf ns-httpd vt
    clean hpetherconf pd xf86
    clean_tmps hpfcgsc_lanconf pd.OLD xfs*
    clean_uucp hpfcmsconf pdcinfo*
    comsec iforls predictive
    crashconf kminit ptydaemon

    > _____________________________________________
    > From: hpux-admin-owner@DutchWorks.nl
    > [mailto:hpux-admin-owner@DutchWorks.nl
    > <mailto:hpux-admin-owner@DutchWorks.nl> ] On Behalf Of Roger Realsen
    > Sent: Wednesday, April 06, 2005 9:21 AM
    > To: hpux-admin@dutchworks.nl
    > Subject: NIC Duplex Settings
    >
    > HP'ers
    >
    > HP9000 D250
    > HPUX 11.0
    >
    > My WAN guy is doing some research on the switch that this box is plugged
    > in to. He is telling me that the switch speed and duplex settings are
    > different from what the machine actually is. Where can I change the
    > duplex settings for a NIC on this box?
    >
    > TIA
    >
    > Sincerely
    > Roger Realsen 

    --
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)
  • Next message: Roger Realsen: "[HPADM] [SUMMARY]: NIC Duplex Settings"

    Relevant Pages

    • IBM Network Printer 17 Reset/default NIC password
      ... settings using the web interface. ... I've reset the printer to default settings using the ... I've also reset the NIC card using the jumpers on the ...
      (comp.periphs.printers)
    • bge NIC not supporting 1000baseTX
      ... the bge0 NIC interface does not seem to support 1000baseTX settings. ... When the NIC card is set at either 10/100 baseTX, the bge0 interface shows an active state. ... Does that mean that this bge0 NIC card does not support speeds of 1000baseTX or do I have to tweak some kernel or sysctl settings? ...
      (freebsd-questions)
    • Re: ideas on ftp failure?
      ... > What are the media speed and duplex settings of the ethernet cards? ... > And what are the settings of the switch the boxes are pluggedinto. ... Mike ...
      (comp.unix.aix)
    • Re: webpage setup
      ... > upon setting up my website in iis6, ... > settings, i get a message stating "the network location ... > nic card, then i can save the settings with no errror ...
      (microsoft.public.inetserver.iis)
    • replaced nic card....then she no start no more HELP!
      ... removed the nic card and install a dlink card. ... settings", it stayed on that screen for over 30 mins. ... And i still cant get past the ""applying computer ...
      (microsoft.public.windows.server.sbs)