[HPADM] HPVM Boot install problem

Hi admins

I have two HPVM (blade) so here sommes informations

frey5001:root:) model ==> ia64 hp server BL870c
frey5001:root:) uname -a ==> B.11.31 HPUX U ia64

Actually the second blade is in crash mode and I m'trying to use ignite
to restore it

My ignite serveur is frey5001

IPv4 Address 172.17.229.10
IPv4 Status up
Subnet Mask 255.255.255.128
Broadcast Address 172.17.229.127


Here my dbprofile on frey5002 (in crash mode)

Shell> dbprofile
Profile Name: ignite

Client IP address: 172.17.229.11
Subnet Mask: 255.255.255.128
Gateway IP address: 172.17.229.1
Server IP address: 172.17.229.140
Boot File: /opt/ignite/boot/nbp.efi

Lets to start installation

Shell> dbprofile -dn ignite -cip 172.17.229.11 -sip 172.17.229.10 -m
255.255.255.128 -gip 172.17.229.1
Updating profile ignite

Shell> dbprofile -dn ignite -b "/opt/ignite/boot/nbp.efi"
Updating profile ignite

Shell> lanboot select -dn ignite
01
Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|0)/Pci(2|0)/Pci(0|0)/Mac(001B78
79D7EC)
02
Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|0)/Pci(2|0)/Pci(0|1)/Mac(001B78
79D7ED)
03
Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|0)/Pci(4|0)/Pci(0|0)/Mac(001B78
79D7EE)
04
Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|0)/Pci(4|0)/Pci(0|1)/Mac(001B78
79D7EF)
05 Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(00226402ED44)
06 Acpi(HWP0002,PNP0A03,100)/Pci(1|1)/Mac(00226402ED45)
07 Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(00226402ED46)
08 Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(00226402ED47)

Select Desired LAN: 05

Selected Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(00226402ED44)

Client MAC Address: 00 22 64 02 ED 44
Client IP Address: 172.17.229.11
Subnet Mask: 255.255.255.128
BOOTP Server IP Address: 172.17.229.10
DHCP Server IP Address: 0.0.0.0
Boot file name: /opt/ignite/boot/nbp.efi

Retrieving File Size
PXE-E18: Timeout. Server did not respond.
Exit status code: Invalid Parameter


Thanks for any idea which help me to resolve the probleme



Cordialement (Best regards)

Kazem Bakhshesh (Administrateur Systeme: HP, Linux)

E-Mail: Bakhshek@xxxxxxxxxx <mailto:Bakhshek@xxxxxxxxxx>

Tel: 01.72.94.73.09


Relevant Pages

  • Wokstation hangs after "Boot Client" - TFTP timeout
    ... would like to use this system as a Ignite server; ... be able to install other workstations from this system. ... to-be-installed workstation; this system should act as a boot helper. ... These IPs are also in the instl_boottab on the Ignite ...
    (comp.sys.hp.hpux)
  • [HPADM] FOLLOW-UP-QUESTION: Restoring patches on a DR Server (Ignite)
    ... What if the server you are restoring to with Ignite, ... supports the same version of HP-UX as the production server? ... In short, use Ignite!!! ...
    (HP-UX-Admin)
  • [HPADM] Co-existance of instl_bootd and bootpd
    ... We have a server that performs Ignite backups and uses the ignite ... to DHCP requests from our Linux client so that it can pass the request off ... someone here mentioned that the ignite bootp and normal bootp ...
    (HP-UX-Admin)
  • [HPADM] NFS - Mounted Filesystem
    ... A few months ago we built a server using the ignite ... tape taken from another similar server. ... noticing an error message on the new server every time ...
    (HP-UX-Admin)
  • Re: How to copy files from server to client during ignition?
    ... How can I automate this procedure using ignite? ... gzip or compress, as well as the normal SD stuff. ... These archives can be loaded from any server using NFS, ...
    (comp.sys.hp.hpux)