Sun Video Cards .. PGX32 or PGX64

From: Ath Kar (ak94601_at_yahoo.com)
Date: 05/27/03

  • Next message: Chris Hanna: "odd SunFire 880 networking problem"
    To: sunmanagers@sunmanagers.org
    Date: Tue, 27 May 2003 18:01:18 +0100
    
    

    Hi

    I am in process of connecting Sun servers to connect
    to Autoview 400 switch. When I connected Sunfire 280R
    and V880 (both USB), SparcStation 20, Ultra 1,
    Ultra-10 to switch, I was able to see Console messages
    on Monitor connected to Switch for Sunfire, but I was
    not able to see console messages from Ultra 1,
    Sparcstation 20, Ultra-10 (I see "no signal input").
    But when I connect Sun monitor directly to any of this
    machine that works fine. When I contacted Cust-support
    of Autoview switch, they wanted to know details of Sun
    Video Cards PGX32 or PGX64 ? How can I determine
    without opening box (command line) ? or any other hint
    will be helpful.

    TIA
    Ath

    __________________________________
    Do you Yahoo!?
    The New Yahoo! Search - Faster. Easier. Bingo.
    http://search.yahoo.com
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Chris Hanna: "odd SunFire 880 networking problem"

    Relevant Pages

    • Sun Video Cards .. PGX32 or PGX64
      ... I am in process of connecting Sun servers to connect ... When I connected Sunfire 280R ... Ultra-10 to switch, I was able to see Console messages ... But when I connect Sun monitor directly to any of this ...
      (SunManagers)
    • Re: Electrical Questions
      ... It's fairly a common way to power a switch. ... travelers to a load you would have connected them to each other and the ... How can one connect something to each traveler without connecting to ... So Switch-1 controls whether one side of the lamp is hot ...
      (alt.home.repair)
    • Re: LAN + shared Internet connection
      ... Gigabit Ethernet Switch? ... and simply run a cable from a LAN port on the router to a LAN port on the ... I am aware that it is possible to set up his office computer to use ... some problems getting the computers on the LAN connecting to each other. ...
      (microsoft.public.win2000.networking)
    • Re: Electrical Questions
      ... It's fairly a common way to power a switch. ... travelers to a load you would have connected them to each other and the ... How can one connect something to each traveler without connecting to ... So Switch-1 controls whether one side of the lamp is hot ...
      (alt.home.repair)
    • Re: Anyone successfully bonding 2 ether ports?
      ... I am a bit rusty on this, but if you setup the box with 2 ports configured with one IP address your connected layer 2 switch also needs some intelligence to know that you are running it this way. ... From memory Cisco's CDP use to get into trouble and had to be disbled if you setup a "loop" between two of their devices (eg connecting two L2 switches with two cables) in this way. ...
      (alt.os.linux.suse)