serial console

From: Daxesh Patel (dpatel10_at_comcast.net)
Date: 05/28/03

  • Next message: msmabc_at_hotmail.com: "SUMMARY : PGX32 - TSI - CDE" 
    Date: Wed, 28 May 2003 12:13:09 -0400
To: sunmanagers@sunmanagers.org

    This is probably a easy question for you guys. I am trying to access
    my ultra5 box without a monitor but can seem to get it to work with
    hyperterminal. I am sure this is possible because I remember doing
    this a long time ago just not sure how the cabeling worked, but if
    anyone knows what the specific connections are can you please advice
    me on how to connect my cables? Right now I am connecting a DB25 to a
    RJ45 cyclades connector to the serial port A on the ultra5 and this
    connects to my laptop through com1. I have the following settings on
    my Hyperterminal:

    > Bits per second: 9600
    > Data Bits: 8
    > Parity: None
    > Stop Bits: 1
    > Flow Control: Hardware.

     I kept everything to its default except the Bits per second and
     changed it from a 2400 to a 9600. Is there something I am doing
     wrong? Any suggestions or comments are very appreciated.

    Thanks in advance,
    Dp.
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: msmabc_at_hotmail.com: "SUMMARY : PGX32 - TSI - CDE"