configuration of silkworm 3800

From: manori atapattu (shyania_at_hotmail.com)
Date: 07/02/03

  • Next message: Azzopardi Konrad: "Console" 
    To: sunmanagers@sunmanagers.org
Date: Wed, 02 Jul 2003 09:15:39 +0000

    Hi all,

    We want to configure silkworm 3800 such that a sun machine(E3000 ,HBA Part
    number-501-3060) can see the array (T3 +) . Even though both array and sun
    machine are connected to the silkworm switch ,still sun machine can not
    see the array.
    We have configured a zone in the switch which includes port 0
    and port1 and those array and the machine is connected to those
    configured ports( Port 0 and 1).

      Is there any other configurations to be done?
      San package(SUNWsan) is installed in the machine .

    Please advice.

      thanks
    Manori.

    _________________________________________________________________
    Help STOP SPAM with the new MSN 8 and get 2 months FREE*
    http://join.msn.com/?page=features/junkmail
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Azzopardi Konrad: "Console"

    Relevant Pages

    • rs232...
      ... Hello Scott and everyone else who will read this post. ... //immediatelly assigned to this array. ... // from the rs232 port), ... I thank Scott and all members of the news groups that have helped me on the ...
      (microsoft.public.vc.language)
    • Re: Easier initializing of blockram (spartan3)
      ... >> (including parity bus) at the port at adress A. This is a plain mapping ... > array passed as a generic and generate the proper init_xx attributes. ... init_000(31 downto 0); ...
      (comp.arch.fpga)
    • Re: rs232...
      ... 'j' for non-equality to BYTESTOREAD in the end of 'do' loop, ... #define BYTESTOREAD 25 //Depicts the amount of bytes to read! ... //immediatelly assigned to this array. ... // from the rs232 port), ...
      (microsoft.public.vc.language)
    • Re: building on your own a large data storage ...
      ... RAID-5 array because doing I/O on two devices on the same IDE ... primary IDE port and one on the secondary IDE port. ... understanding the trade-offs (partioning an array of disks vs. ... When a fan goes ...
      (comp.sys.ibm.pc.hardware.storage)
    • Re: Shared /usr/ports directories
      ... Where configurations get saved can vary slightly. ... >>That way all the files that are created when you build a port ends up ... Another options is to download all the distfiles in advance to the ... > I usually do a 'make install clean' anyway, but it would be good to be ...
      (freebsd-questions)