Sun HS PCI sending x25 over isdn

From: Asier Urrutia (asier_at_alphyra.ie)
Date: 07/30/03

  • Next message: Alan Sparks: "SUMMARY: routing from a specific interface" 
    Date: Wed, 30 Jul 2003 20:42:44 +0200 (CEST)
To: sunmanagers@sunmanagers.org

    Hi all,

            I've got a Sun E450 box with a Sun HS PCI Card running Solstice
    9.2. Recently we've got an ISDN line to connect to a Company and send
    X25 traffic. The thing is that the ISDN line providers didn't get involved
    in anything else and I would need some help on the network schematic. The
    first thing is to confirm that the following is right:

    | | (X25 traffic)
    |E450 |||| ------------------- ISDN Modem ------------ Company
    | |Sun PCI HS Card

    then...

            a) What requirements does the ISDN modem need in order to connect
    it to the Sun PCI Card? I.e, available ports, cable used to connect,
    etc...

            b) what requirements does the ISDN Modem need in order to send X25
    traffic over ISDN?

            c) In order to configure a new circuit using Solstice, should I
    use a DTE or DCE interface? Any further details will be much appreciated.

    Thanks in advance!!!
    Asier
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Alan Sparks: "SUMMARY: routing from a specific interface"