Trap 3e when booting Tatung Ultra 10
From: Greg Polanski (greg_polanski_at_adc.com)
Date: 09/02/03
- Previous message: Karl.Rossing_at_Federated.CA: "refreshing /net"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 02 Sep 2003 16:47:06 -0500 To: sunmanagers@sunmanagers.org
I replaced both disk drives on a Tatung Sun Ultra 10
and am now getting "Trap 3e" when I power on the system
or issue 'reset' at the OK prompt
HOWEVER, it boots fine when I type the command, boot.
ok boot
What changes do I need to make to get this system to boot
at power on?
eeprom, printenv, and devalias follow.
I am stumped. I have not recognized the solution at Google
nor docs.sun.com I have used STOP-n to fix nvramrc changes
that I have tried. Thanks to this list.
mn00s70548% tip cuaa
connected
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.8 SME, 1024 MB memory installed, Serial #11281812.
Ethernet address 8:0:20:ac:25:94, Host ID: 80ac2594.
Trap 3e
ok boot
Boot device: disk File and args:
SunOS Release 5.9 Version Generic_112233-07 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
configuring IPv4 interfaces: hme0.
Hostname: obelisk
The system is coming up. Please wait.
starting rpc services: rpcbind done.
Setting netmask of hme0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway obelisk
syslog service starting.
volume management starting.
The system is ready.
obelisk console login:
# eeprom
tpe-link-test?=true
scsi-initiator-id=7
keyboard-click?=false
keymap: data not available.
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
pcia-probe-list=1,2,3,4
pcib-probe-list=1,2,3,4
mfg-mode=off
diag-level=max
#power-cycles=75
system-board-serial#: data not available.
system-board-date=37dae12c
last-poweroff-cause=0
env-monitor=disabled*
fcode-debug?=false
output-device=screen
input-device=keyboard
load-base=16384
boot-command=boot
auto-boot?=true
watchdog-reboot?=false
diag-file: data not available.
diag-device=net
boot-file: data not available.
boot-device=disk net
local-mac-address?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
silent-mode?=false
use-nvramrc?=false
nvramrc: data not available.
security-mode=none
security-password: data not available.
security-#badlogins=0
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
hardware-revision: data not available.
last-hardware-update: data not available.
diag-switch?=false
#
ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pcia-probe-list 1,2,3,4 1,2,3,4
pcib-probe-list 1,2,3,4 1,2,3,4
mfg-mode off off
diag-level max max
#power-cycles 75
system-board-serial#
system-board-date 37dae12c
last-poweroff-cause 0 0
env-monitor disabled* disabled*
fcode-debug? false false
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? false false
ok
ok devalias
screen /pci@1f,0/pci@1,1/TSI,gfxp@4
cpu /SUNW,UltraSPARC-IIi@0,0
pcib /pci@1f,0/pci@1,1
pcia /pci@1f,0/pci@1
ebus /pci@1f,0/pci@1,1/ebus@1
systemprom /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
i2c /pci@1f,0/pci@1,1/ebus@1/SUNW,rasctrl
net /pci@1f,0/pci@1,1/network@1,1
floppy /pci@1f,0/pci@1,1/ebus@1/fdthree
diskx6 /pci@1f,0/pci@1/scsi@1,1/disk@6,0
diskx5 /pci@1f,0/pci@1/scsi@1,1/disk@5,0
diskx4 /pci@1f,0/pci@1/scsi@1,1/disk@4,0
diskx3 /pci@1f,0/pci@1/scsi@1,1/disk@3,0
diskx2 /pci@1f,0/pci@1/scsi@1,1/disk@2,0
diskx1 /pci@1f,0/pci@1/scsi@1,1/disk@1,0
diskx0 /pci@1f,0/pci@1/scsi@1,1/disk@0,0
scsix /pci@1f,0/pci@1/scsi@1,1
disk /pci@1f,0/pci@1/scsi@1/disk@0,0
cdrom /pci@1f,0/pci@1/scsi@1/disk@6,0:f
tape /pci@1f,0/pci@1/scsi@1/tape@4,0
tape1 /pci@1f,0/pci@1/scsi@1/tape@5,0
tape0 /pci@1f,0/pci@1/scsi@1/tape@4,0
disk6 /pci@1f,0/pci@1/scsi@1/disk@6,0
disk5 /pci@1f,0/pci@1/scsi@1/disk@5,0
disk4 /pci@1f,0/pci@1/scsi@1/disk@4,0
disk3 /pci@1f,0/pci@1/scsi@1/disk@3,0
disk2 /pci@1f,0/pci@1/scsi@1/disk@2,0
disk1 /pci@1f,0/pci@1/scsi@1/disk@1,0
disk0 /pci@1f,0/pci@1/scsi@1/disk@0,0
scsi /pci@1f,0/pci@1/scsi@1
ttyb /pci@1f,0/pci@1,1/ebus@1/se:b
ttya /pci@1f,0/pci@1,1/ebus@1/se:a
keyboard! /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8:forcemode
keyboard /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8
mouse /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3602f8
ok
-- _______________________________________________________________ Greg Polanski mailto:greg_polanski@adc.com ADC Telecommunications, Inc. 952.917.0548 MS 36 952.917.0641 FAX PO Box 1101 612.309.4493 cell/pager Minneapolis, MN 55440-1101 6123094493@mobile.att.net _______________________________________________________________ _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Previous message: Karl.Rossing_at_Federated.CA: "refreshing /net"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
