Nameserver Acess

From: Schaper, Soeren (Schaper_at_media-saturn.com)
Date: 11/12/03

  • Next message: Schaper, Soeren: "[SUMMARY] Nameserver Acess" 
    To: 'sunmanagers' <sunmanagers@sunmanagers.org>
Date: Wed, 12 Nov 2003 10:29:59 +0100

            Hi Managers,

     I set up a Blade100 (Solaris 9) at home and configured a dial up for remote
    acess to my company via an ISDN Router. The Blade and the router are
    connected via Ethernet. Every few minutes the Blade tries to do a DNS
    reverse lookup for his own Name, causing a dialup. Does anyone knows why the
    Blade is doing this and how to prevent it short of putting a filter on the
    router ?

    Soeren
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Schaper, Soeren: "[SUMMARY] Nameserver Acess"

    Relevant Pages

    • Re: OT The OT political diatribes
      ... Will my new Rikon band saw come with a blade? ... > tilt, what is the best router bit, who makes the best dado set, my jig saw ... > it fit inside my shop, can I carry it on my back from the driveway, the Saw ... > Stop TS will make people careless and will never fly, I only buy American ...
      (rec.woodworking)
    • Re: Progressively more intimidating tools.
      ... Drill press bit bind on a workpiece and almost took my hand ... handheld 14" gas saw with a composite cutting blade for steel. ... Bandsaw, planer, CMS, router. ...
      (rec.woodworking)
    • Re: Large Rabbet
      ... It looks like an "L" with a bullnose on the face. ... cut a large rabbet to form the "L" shape. ... I also have a dado blade. ... a large router. ...
      (rec.woodworking)
    • Re: Saw blades with V shaped cutters
      ... I think I've tried every off the shelf "V" producing router bit ... I think the real problem is there isn't a good path to evacuate chips ... Hambone and DJ, I think the custom blade idea is the most promising, ...
      (rec.woodworking)
    • Re: Saw blades with V shaped cutters
      ... The problem with V groove router bits is that they don't cut at the center. ... A saw blade would be much better for your application. ... I think the real problem is there isn't a good path to evacuate chips ...
      (rec.woodworking)