SunFire V240 - lock ethernet interface

From: Brett Hales (brett.hales_at_baesystems.com)
Date: 12/02/03

  • Next message: Martin de Koning: "SUMMARY: Metadisk and data retrieval" 
    To: sunmanagers@sunmanagers.org
Date: 02 Dec 2003 15:12:46 +1030

    Hi,

    I am trying to lock the Ethernet interface (bge0) on a SUN Fire V240 to
    100fdx.

    I can successfully do this by using the below in a script.

    ndd -set /dev/bge0 adv_1000fdx_cap 0
    ndd -set /dev/bge0 adv_1000hdx_cap 0
    ndd -set /dev/bge0 adv_100fdx_cap 1
    ndd -set /dev/bge0 adv_100hdx_cap 0
    ndd -set /dev/bge0 adv_10fdx_cap 0
    ndd -set /dev/bge0 adv_10hdx_cap 0
    ndd -set /dev/bge0 adv_autoneg_cap 0

    However I would prefer to put these in /etc/system as I have done in the
    past.

    I have tried the following.

    set bge0:adv_1000fdx_cap=0
    set bge0:adv_1000hdx_cap=0
    set bge0:adv_100fdx_cap=1
    set bge0:adv_100hdx_cap=0
    set bge0:adv_10fdx_cap=0
    set bge0:adv_10hdx_cap=0
    set bge0:adv_autoneg_cap=0

    However I still see the following in messages.

    Dec 2 14:42:03 abuxet1 bge: [ID 801725 kern.info] NOTICE: bge0: link up
    100Mbps Half-Duplex (initialised)

    Can anybody tell me what should be in /etc/system to lock bge0 to
    100fdx.

    Thanks,
      

    -- 
Brett Hales <brett.hales@baesystems.com>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
  • Next message: Martin de Koning: "SUMMARY: Metadisk and data retrieval"