UPS for sun fire 6800 and sun T3
From: kimchong (kc4ng_at_singnet.com.sg)
Date: 12/23/03
- Previous message: shahul.hameed_at_uktransco.com: "SUMMARY:V480 systems"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Wed, 24 Dec 2003 01:37:47 +0800 To: sunmanagers@sunmanagers.org
Dear All,
The company i work for have a sun fire 6800 and 4 T3 array connected to
it. Recently, we faced quite a
number of power trips over our side and we were thinking of getting UPS
for the 6800 and 4 T3 array.
On the sun technical specification, the power rating for the 6800 is
6800VA. However the vendor has
provided me a solution of 5KVA . Is this more than adequate ?? Using
the UPS selector software at APC website
seems to give me much lower VA, ~3KVA ( 3 CPU board, 2 processors each
). Anyone knows the actual power requirement
??
Also , for the T3 array, i know that internally there is a UPS battery
located within the PCU.
As the ac power input failed, it will allowed the T3 to flush the cache
data back to the disk.
In this case, do we really need any UPs for the T3??
Hope someone can advise me. Thanks
Regards
kim chong
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Previous message: shahul.hameed_at_uktransco.com: "SUMMARY:V480 systems"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
