Need help with new E450

From: Hare Krishna (hrhk108_at_yahoo.com)
Date: 01/31/04

  • Next message: Bhavesh Shah: "SUMMARY: File disappeared....in solaris 8 after mv twice"
    Date: Fri, 30 Jan 2004 16:28:06 -0800 (PST)
    To: sunmanagers@sunmanagers.org
    
    

    To start with I added a 9Gb Hard drive with solaris 8 loaded added 8
    peices of 2480's and 2 5849 processors with 2 converters.This machine is
    new.
    I plugged in PGX32 and switch it on.
    There is indiacation that the fans are moving smoohly and all LED's show proper functioning
    First this giant does not respond to the keyboard
    Second nothing shows up on the monitor except a message NO SIGNAL.
    Where am I going wrong
    Yahoo! SiteBuilder - Free web site building tool. Try it!
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Bhavesh Shah: "SUMMARY: File disappeared....in solaris 8 after mv twice"

    Relevant Pages

    • Re: How can my application detect the physical network problem
      ... |I have one application running on solaris and other on windows NT. ... |These two systems are connected through ethernet switch box. ... |there is some physical connection problem like wire unplugged from ...
      (comp.unix.programmer)
    • Re: 100% packet loss with new router - help!
      ... I guess sisus01 corresponds to the Solaris machine's IP address? ... You have a broken switch that switches traffic wrong. ... Your Solaris machine has a hardware problem. ... Ethernet cable. ...
      (comp.unix.solaris)
    • Re: What is a run-level in Solaris 10?
      ... but how i do switch a runlevel? ... you switch to a lower run level by using init. ... I init S on my Solaris ...
      (comp.unix.solaris)
    • Re: 100% packet loss with new router - help!
      ... >> tcpdump on the eth0 device on the Linux box, and then ping the Solaris ... > to know the Ethernet address of the Solaris box, ... > You have a broken switch that switches traffic wrong. ... > ARP request goes out, it is broadcast to all machines on the ...
      (comp.unix.solaris)
    • Re: solaris timeline
      ... mwm wasn't included with Solaris 2.5. ... > when we switched to Solaris, we also had to switch to fvwm to be able ... We used IXI Motif I think, ...
      (comp.unix.solaris)