Jumpstarting Sol10 beta 51 problems
From: Greg Wilson (gwilson_at_connect.com.au)
Date: 03/12/04
- Previous message: Rajput raj: "limitation with socket connection/file opening"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Fri, 12 Mar 2004 10:34:07 +1100 To: sunmanagers@sunmanagers.org
hello,
Im getting this problem on 2 different machines
It auto jumpstart works fine but after it sets up the new
partitions and newfs's them it cannot mount them
any ideas?
<snip>
Hardware watchdog enabled
Configuring devices.
ip_rput_dlpi: DL_ATTACH_REQ failed dl_errno 0x8 dl_unix_errno 0x0
ip_rput_dlpi: DL_BIND_REQ failed dl_errno 0x3 dl_unix_errno 0x0
ip_rput_dlpi: DL_PHYS_ADDR_REQ failed dl_errno 0x3 dl_unix_errno 0x0
ip_rput_dlpi: DL_NOTIFY_REQ failed dl_errno 0x7 dl_unix_errno 0x0
ip_rput_dlpi: DL_UNBIND_REQ failed dl_errno 0x3 dl_unix_errno 0x0
Using RPC Bootparams for network configuration information.
Skipping interface bge3
Skipping interface bge2
Skipping interface bge1
Configured interface bge0
Searching for configuration file(s)...
Using sysid configuration file
192.94.41.1:/export/jump/pkgjump/sysidcfg/testjum
p7/sysidcfg
Search complete.
The system is coming up. Please wait.
Begin system identification...
Starting remote procedure call (RPC) services: sysidns done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 192.94.41.1:/export/jump26/pkgjump.
Checking rules.ok file...
Using begin script: scripts/start
Using profile: sysdefs/BASTION10
Using finish script: scripts/finish
Executing JumpStart preinstall phase...
Executing begin script "scripts/start"...
/usr/lib/fs/ufs/mount: /tmp/usr/lib/fs/ufs/mount: not found
status ioctl: Inappropriate ioctl for device
umount: warning: /tmp/sshmntroot not in mnttab
umount: /tmp/sshmntroot not mounted
Begin script scripts/start execution completed.
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Processing default locales
- Specifying default locale (en_US.ISO8859-1)
Processing profile
- Selecting cluster (SUNWCreq)
- Selecting package (SUNWadmap)
- Selecting package (SUNWtoo)
- Selecting package (SUNWadmc)
- Selecting package (SUNWscpu)
- Selecting package (SUNWadmfw)
- Selecting package (SUNWmfrun)
- Deselecting package (SUNWsndmr)
- Deselecting package (SUNWsndmu)
- Selecting locale (en_US.ISO8859-1)
- Selecting all disks
- Configuring boot device
- Using disk (c0t0d0) for "rootdisk"
- Configuring / (c0t0d0s0)
- Configuring swap (c0t0d0s1)
- Configuring /var (c0t0d0s3)
- Configuring (c0t0d0s4)
- Configuring /opt (c0t0d0s6)
- Configuring (c0t0d0s7)
- Configuring /var/log (c0t0d0s5)
- Deselecting unmodified disk (c0t1d0)
- Deselecting unmodified disk (c0t2d0)
- Deselecting unmodified disk (c0t3d0)
Verifying disk configuration
- WARNING: Changing the system's default boot device in the EEPROM
Verifying space allocation
- Total software size: 152.43 Mbytes
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c0t0d0s0)
- Creating /var (c0t0d0s3)
- Creating /var/log (c0t0d0s5)
- Creating /opt (c0t0d0s6)
ERROR: Could not mount / (/dev/dsk/c0t0d0s0)
ERROR: Could not mount the configured file system(s)
ERROR: System installation failed
#
<snip>
-- Greg Wilson System Administrator gwilson@connect.com.au _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Previous message: Rajput raj: "limitation with socket connection/file opening"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
