SUMMARY: Hyperterm to Sunfire 280R

From: Callan, Chris (CCallan_at_fnly.com)
Date: 03/29/04

  • Next message: Andrew Toon: "V440 Hardware raid and Soft Partitions" 
    Date: Mon, 29 Mar 2004 14:05:16 -0500
To: "Sun Managers" <sunmanagers@sunmanagers.org>

    I was able to connect to the Serial Port and after powering on the system hit
    Ctrl-Shift-Break and I was able to get to the ok prompt. Thanks for the
    help.

    -----Original Message-----
    From: Callan, Chris
    Sent: Friday, March 26, 2004 10:51
    To: Sun Managers
    Subject: Hyperterm to Sunfire 280R

    Is there a way to Hyperterm into my Sunfire 280R to send a break to it. It's
    in a continuous loop.
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Andrew Toon: "V440 Hardware raid and Soft Partitions"

    Relevant Pages

    • Re: v210 Solaris 10 mysterious crashes; no reason
      ... the hyperterm session, and sure enough, sitting at the OK prompt, but ... Have you turned off serial console breaks? ... Next time, try "go" when it is sitting in the ok prompt (if it continues, ...
      (comp.unix.solaris)
    • RE: Hyperterm to Sunfire 280R
      ... Connected directly with TTPro and upon cold boot used the Ctrl/Shift/Break key ... Is there a way to Hyperterm into my Sunfire 280R to send a break to it. ...
      (SunManagers)
    • Re: HELP! Did sys-unconfig, but system not asking for new info
      ... >> Colin, ... >> I don't know how old it is, but I think it's something like a SunFire ... The> prompt is reminiscent of the ... Created /etc/nodename with hostname it. ...
      (comp.unix.solaris)
    • Sunfire V490 going to the Openboot prompt for unknown reason
      ... Our sunfire V490 is unexpectedly going to the openboot prompt(ie the ok ... the reason why the server is going to the openboot prompt. ... troubleshoot this issue. ...
      (comp.unix.solaris)
    • Re: Sunfire v210 serial console... configuration
      ... I had the fortunate opportunity of opening a new Sunfire box today - ... where I promptly took the adapter and cable and tested it against the ... I'm at an "ok" prompt, and I can't remember how to get out of ...
      (comp.unix.solaris)