[SUMMARY] SCSI-IDE Ultra10

From: Paramasivam, Meenakshisundaram (mparamas_at_iupui.edu)
Date: 04/08/04

  • Next message: Rodgers Rodney Contr 13 AF/SAIC: "command" 
    Date: Wed, 7 Apr 2004 18:08:49 -0500
To: <sunmanagers@sunmanagers.org>

    The problem really was a disconnected power cable inside enclosure.
    I apologize for wasting valuable time and resources.

    I would like to thank especially Darren Dunham who communicated
    back and forth on this case.

    I placed the 250 GB IDE disk on Blade2000 (should also work on Ultra10)
    scsi chain to get the disk up quick. Solaris 8 (Generic_108528-12),
    OPB 4.2.4.

    Format sees it now:

           4. c0t14d0 <ATA-WDC WD2500PB-15.0 cyl 60563 alt 2 hd 64 sec 126>
              /pci@8,700000/scsi@6,1/sd@e,0

    Part Tag Flag Cylinders Size Blocks
      0 root wm 0 0 (0/0/0) 0
      1 swap wu 0 0 (0/0/0) 0
      2 backup wu 0 - 60562 232.88GB (60563/0/0) 488380032
      3 unassigned wm 0 0 (0/0/0) 0
      4 unassigned wm 0 0 (0/0/0) 0
      5 unassigned wm 0 0 (0/0/0) 0
      6 usr wm 0 - 30280 116.44GB (30281/0/0) 244185984
      7 unassigned wm 30281 - 60562 116.44GB (30282/0/0) 244194048

    Note: 232.88 GB size in machine = 250 GB size by vendor x 0.9313
                                      where 0.9313 = (1000/1024 kb) (1000/1024 kb)
    (1000/1024 kb).

    format.dat was not needed.

    > -----Original Message-----
    > From: Paramasivam, Meenakshisundaram
    > Sent: Tuesday, April 06, 2004 6:14 PM
    > To: 'sunmanagers@sunmanagers.org'
    > Subject: SCSI-IDE Ultra10
    >
    > Hi,
    >
    > I have WD2500PB disk and AEC-7726Q SCS-IDE bridge
    > connected to Ultra 10 running Solaris 8 (Generic_108528-17)
    > with OBP 3.19
    >
    > probe-scsi-all:
    > can not find this particular drive
    > format:
    > can not find this particular drive
    >
    > I do not want to use on-board 24-bit IDE controller. I did boot -r.
    >
    > Question:
    > What will resolve the problem? (Looks like firmware, OS and patch updates
    are due).
    >
    > FYI:
    > I have WD2500JB working fine via SCSI-IDE bridge on a Blade1500 running
    Solaris 8 (Generic_108528-27) with OBP 4.9.5 (2003/09/15).
    >
    > Thanks in advance.
    >
    > Sundar
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Rodgers Rodney Contr 13 AF/SAIC: "command"

    Relevant Pages

    • Re: Dialog resource with parameters.
      ... dialog resources. ... What is the common technique to perform a "printf" and substitute format specifiers with their values before showing the dialog box? ... GetDlgItemText(hDlg, ID_CONTROL, strFormat, ... The format might also be in a string table; in that case substitute LoadStringfor GetDlgItemText. ...
      (microsoft.public.win32.programmer.ui)
    • Article : Resource File Generator (Resgen.exe .Net FrameWork Tools Series)
      ... ==> .resources files from text or .resx files. ... In order to convert from one type to another we must ensure that the data written in them is in the correct format. ... .Resources file is a binary file which is used by the assemblies ...
      (microsoft.public.dotnet.academic)
    • Article : Resource File Generator (Resgen.exe .Net FrameWork Tools Series)
      ... ==> .resources files from text or .resx files. ... In order to convert from one type to another we must ensure that the data written in them is in the correct format. ... .Resources file is a binary file which is used by the assemblies ...
      (microsoft.public.dotnet.faqs)
    • Article : Resource File Generator (Resgen.exe .Net FrameWork Tools Series)
      ... ==> .resources files from text or .resx files. ... In order to convert from one type to another we must ensure that the data written in them is in the correct format. ... .Resources file is a binary file which is used by the assemblies ...
      (microsoft.public.dotnet.languages.vc)
    • Article : Resource File Generator (Resgen.exe .Net FrameWork Tools Series)
      ... ==> .resources files from text or .resx files. ... In order to convert from one type to another we must ensure that the data written in them is in the correct format. ... .Resources file is a binary file which is used by the assemblies ...
      (microsoft.public.dotnet.framework)