ndd command

From: Wamala, Muhamudu (Muhamudu.Wamala_at_HRCC.ON.CA)
Date: 07/28/04

  • Next message: Alan Car***: "SUMMARY: Multiple C compilers question" 
    To: "'sunmanagers@sunmanagers.org'" <sunmanagers@sunmanagers.org>
Date: Wed, 28 Jul 2004 10:50:11 -0400

    Hi All,

    When you query the driver "/dev/hme" using the ndd command, i.e. ndd -get
    /dev/hme \?, you get a list of parameters that are configuration for that
    driver. What is the difference between the information returned when you
    query the following two sets of parameters:

    adv_autoneg_cap (read and write)
    adv_100T4_cap (read and write)
    adv_100fdx_cap (read and write)
    adv_100hdx_cap (read and write)
    adv_10fdx_cap (read and write)
    adv_10hdx_cap (read and write)

    AND

    autoneg_cap (read only)
    100T4_cap (read only)
    100fdx_cap (read only)
    100hdx_cap (read only)
    10fdx_cap (read only)
    10hdx_cap (read only)

    Thanks.

    Moe

    This information is directed in confidence solely to the person named above
    and may not otherwise be distributed, copied or disclosed. Therefore, this
    information should be considered strictly confidential. If you have received
    this email in error, please notify the sender immediately via a return email
    for further direction. Thank you for your assistance.
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Alan Car***: "SUMMARY: Multiple C compilers question"