(no subject)

mgreene_at_aci.on.ca
Date: 07/29/04

  • Next message: mgreene_at_aci.on.ca: "OOPS...AIT2 errors"
    To: sunmanagers@sunmanagers.org
    Date: Thu, 29 Jul 2004 15:33:51 -0400
    
    

    Hi all,

    I have an error message on bootup...please see details below.

    Snippit from my bootup messages:
    ok probe-scsi-all
    /pci@1f,0/pci@5/scsi@2,1

    /pci@1f,0/pci@5/scsi@2
    Target 0
      Unit 0 Removable Device type 8 SPECTRA 215 1008
    Target 1
      Unit 0 Removable Tape SONY SDX-500C 01cd
    Target 2
      Unit 0 Removable Tape SONY SDX-500C 01cd

    ok boot -r
    Boot device: /pci@1f,0/ide@d/disk@0,0:a File and args: -r
    SunOS Release 5.8 Version Generic_117350-02 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    configuring IPv4 interfaces: eri0 qfe0.
    Hostname: misnbu04
    Configuring /dev and /devices
    /pci@1f,0/pci@5/scsi@2/st@1,0 (st1):
            SONY_AIT options value invalid bits set: 0x4000
    /pci@1f,0/pci@5/scsi@2/st@2,0 (st2):
            SONY_AIT options value invalid bits set: 0x4000
    VERITAS SCSA Generic Revision: 3.4d
    Configuring the /dev directory (compatibility devices)
    The system is coming up. Please wait.

    What I am worried about....is the SONY_AIT options value invalid bits set:
    0x4000

    st.conf entries...
    tape-config-list =
    "SONY SDX-500C", "Sony AIT2 8mm", "SONY_AIT";
    SONY_AIT = 1,0x34,0,0x3d639,4,0x13,0x8c,0x8c,0x8c,3;

    Attached my SpectraLogic treefrog library (Verified SCSI cable)

    Also verified the st.conf entry with the manual...and it is what I used on
    the other system that I used this library on previously. The only
    difference is this is a newer build with obviously a newer st patch
    (108725-16 with associated required patches).

    It is a differential library connected to a sun dual channel differential
    PCI card.

    Nothing on Sun Managers
    Nothing on SunSolve

    Arrgggg...

    Will summarize.

    --------------------------------------------------------------------
    mail2web - Check your email from the web at
    http://mail2web.com/ .
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: mgreene_at_aci.on.ca: "OOPS...AIT2 errors"

    Relevant Pages

    • OOPS...AIT2 errors
      ... I hate ... Target 0 ... Copyright 1983-2003 Sun Microsystems, Inc. ... configuring IPv4 interfaces: eri0 qfe0. ...
      (SunManagers)
    • Re: Newbie: cant boot
      ... target NTLDR with this one on the development machine. ... I mean the whole disk, ... target hardware component generated on the last step, ... flash module, inserted in on target, turned it on and error message ...
      (microsoft.public.windowsxp.embedded)
    • Re: C:windowsassemblyGACADODB for VB .net 2.0 install
      ... error message but it's a .net security issue. ... I was able to create a Helloworld app and I added adodb to it (didn't ... To narrow the problem you might start to see if the target computer is ... installing my VB .net 2.0 app? ...
      (microsoft.public.dotnet.languages.vb)
    • Re: C:windowsassemblyGACADODB for VB .net 2.0 install
      ... error message but it's a .net security issue. ... I was able to create a Helloworld app and I added adodb to it (didn't call ... To narrow the problem you might start to see if the target computer is ... installing my VB .net 2.0 app? ...
      (microsoft.public.dotnet.languages.vb)
    • Re: XP Windows updates not happening
      ... Software Synchronization Unable to Connect: Windows is unable to connect to ... updates according to the set schedule. ... Target version: 5.5.3790.2182 Required: 5.5.3790.2182 ... Got the error message 0x80072EE2. ...
      (microsoft.public.windowsxp.general)