Panic when we try to reinstall a E10k domain

From: Filipe Litaiff (filipe_litaiff_at_optiglobe.com.br)
Date: 08/20/04

  • Next message: Vani Bhat: "CDROM ejecting continuously"
    Date: Fri, 20 Aug 2004 11:15:55 -0300
    To: <sunmanagers@sunmanagers.org>
    
    

    Greetings forumers,

    We are trying to do reinstall Solaris on an E10k domain. This domain
    runs fine with Solaris 2.6, but we need it running with 2.8. Tha old
    installation is a legacy.

    But.... When we give the boot net command, the get a panic...

    (...)
    2b000
    Requesting Internet address for 0:0:be:a6:b4:55
    Alloc of 0x2000000 bytes at 0x10880000 refused.

    panic[cpu24]/thread=10408000: Cannot allocate IOMMU TSB arrays
    (...)

    This system runs OK with 2.6, all disks appear. But the interesting part
    is that when we go to the ok prompt, the probe-scsi-all doesnt
    respond...

    The boot disks are connected through this card:

    http://sunsolve.sun.com/handbook_pub/Devices/Fibre_Channel/FIBRE_FC_AL_F
    C100_S.html

    The prtdiag of the domain:

         Bus Freq
    Brd Type MHz Slot Name Model
    --- ---- ---- ---- --------------------------------
    ----------------------
     6 SBus 25 0 SUNW,qfe SUNW,sbus-qfe
     6 SBus 25 0 SUNW,qfe SUNW,sbus-qfe
     6 SBus 25 0 SUNW,qfe SUNW,sbus-qfe
     6 SBus 25 0 SUNW,qfe SUNW,sbus-qfe
     6 SBus 25 0 SUNW,socal/sf (scsi-3) 501-3060
     6 SBus 25 1 network SUNW,sbus-gem

    The old boot disk device:

    dwerp # ls -lt /dev/dsk/c0t4d0s2
    lrwxrwxrwx 1 root root 71 Oct 18 2003 /dev/dsk/c0t4d0s2
    ->
    ../../devices/sbus@59,0/SUNW,socal@0,0/sf@0,0/ssd@w2200002037f0f79c,0:c

    The weird fact is that the "old" S.O. works fine with boot discs that
    are being reached through fiber, but when we try to install Solaris 2.8
    we got a panic. This panic appears to be caused by the install process
    inability to to see the disks through fiber. Is this right?

    Do we have to change something on the installation server (ssp in this
    case)? Is there any caveat about installing a domain that sees its boot
    disks by fiber? Where do we start?

    Thanks, any help would be much appreciated.

    Filipe Litaiff
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Vani Bhat: "CDROM ejecting continuously"

    Relevant Pages

    • Re: sunmanagers Digest, Vol 8, Issue 7 ... Slow Boot Up
      ... Just checking if we have the same cause for slow boot up? ... Solaris 8 Problem After Patches Installed ... Using PuTTY to send Control-? ... After installation of Solaris 8 on E250 I had to install Raptor GFX Open ...
      (SunManagers)
    • Problems installing Debian Linux 3.0r2 on a sun ultra5 (ultrassparc II)
      ... I had created the 5th partiton for linux and the 6th for the linux ... Solaris I tried to make a boot floppy for linux but ... The Debian linux installation has overwritten my boot block for solaris. ...
      (Debian-User)
    • Problems
      ... I had a problem installing linux on a ultra5 with solaris 2.7 and solaris 2.8 ... Solaris I tried to make a boot floppy for linux but ... The Debian linux installation has overwritten my boot block for solaris. ...
      (Debian-User)
    • Thank You
      ... I will try making the boot disks. ... your computer and start a repair installation of XP. ... for an entry at the top of the windows titled Boot. ...
      (microsoft.public.windowsxp.general)
    • Re: [fedora-list] How do a fix a non working kernel installation ?
      ... When I boot from it, it gives me the grub> command line. ... sign I don't have the USB installation right or is that the tool that ... the BIOS has reordered disks and you aren't booting from the ...
      (Fedora)