got scsi bus reset error in E250

From: prashant singh (prash_pcs_at_yahoo.com)
Date: 08/31/04

  • Next message: Patrick.McDermott_at_bedbath.com: "link speed on a V210" 
    Date: Tue, 31 Aug 2004 06:10:37 -0700 (PDT)
To: sunmanagers@sunmanagers.org

    Hi all
    i am using a SUN E250 machine as a firewall long back i have upgraded this machine with 72 gb hard disk and it was working fine ,
    but for the last one week it start giving error indicating for both hard disk
    sample text is as follows
     
    ******************************************************************************************************
    Aug 27 11:10:36 noidaFW scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
    Aug 27 11:10:36 noidaFW Cmd (0x35681a0) dump for Target 8 Lun 0:
    Aug 27 11:10:36 noidaFW scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
    Aug 27 11:10:36 noidaFW cdb=[ 0x2a 0x0 0x8 0x7f 0x16 0x6f 0x0 0x
    0 0x1 0x0 ]
    Aug 27 11:10:36 noidaFW scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
    Aug 27 11:10:36 noidaFW pkt_flags=0x4000 pkt_statistics=0x60 pkt_state=0
    x7
    Aug 27 11:10:36 noidaFW scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
    Aug 27 11:10:36 noidaFW pkt_scbp=0x0 cmd_flags=0x1860
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    i@3 (glm0):
    Aug 27 11:10:36 noidaFW Disconnected tagged cmd(s) (1) timeout for Targe
    t 8.0
    Aug 27 11:10:36 noidaFW genunix: [ID 408822 kern.info] NOTICE: glm0: fault detec
    ted in device; service still available
    Aug 27 11:10:36 noidaFW genunix: [ID 611667 kern.info] NOTICE: glm0: Disconnecte
    d tagged cmd(s) (1) timeout for Target 8.0
    Aug 27 11:10:36 noidaFW glm: [ID 401478 kern.warning] WARNING: ID[SUNWpd.glm.cmd
    _timeout.6018]
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    Aug 27 11:10:54 noidaFW fw: [ID 209021 kern.notice] FW-1: lost 4 log/trap messag
    es
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    i@3 (glm0):
    Aug 27 11:10:36 noidaFW Disconnected tagged cmd(s) (1) timeout for Targe
    t 8.0
    Aug 27 11:10:36 noidaFW genunix: [ID 408822 kern.info] NOTICE: glm0: fault detec
    ted in device; service still available
    Aug 27 11:10:36 noidaFW genunix: [ID 611667 kern.info] NOTICE: glm0: Disconnecte
    d tagged cmd(s) (1) timeout for Target 8.0
    Aug 27 11:10:36 noidaFW glm: [ID 401478 kern.warning] WARNING: ID[SUNWpd.glm.cmd
    _timeout.6018]
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    i@3 (glm0):
    Aug 27 11:10:36 noidaFW got SCSI bus reset
    Aug 27 11:10:36 noidaFW genunix: [ID 408822 kern.info] NOTICE: glm0: fault detec
    ted in device; service still available
    Aug 27 11:10:36 noidaFW genunix: [ID 611667 kern.info] NOTICE: glm0: got SCSI bu
    s reset
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    i@3/sd@8,0 (sd7):
    Aug 27 11:10:36 noidaFW SCSI transport failed: reason 'reset': retrying
    command
    Aug 27 11:10:36 noidaFW scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scs
    i@3/sd@8,0 (sd7):
    Aug 27 11:10:36 noidaFW SCSI transport failed: reason 'timeout': retryin
    g command
    Aug 27 11:10:53 noidaFW fw: [ID 773370 kern.notice] FW-1: log message queue is f
    ull
    Aug 27 11:10:54 noidaFW fw: [ID 209021 kern.notice] FW-1: lost 4 log/trap messag
    es
    ****************************************************************************************************
     
     
    during this time server stops responding and i loose the packets , i have disconnected the cdrom drive as it was giving error for sync slow down and removed extra hard disk which was connected to this machine and also changed the same hardisk for what error shown above ,
    there no extra devices are connected with this system accept the two hard disk ,and the errors are coming for both hard disk ,in a same manner
     
    IF ANY ONE CAN HELP ME OUT ON THIS I WILL BE VERY THANKFUL
     
    THANKS TO ALL
    PRASHANT
    New and Improved Yahoo! Mail - Send 10MB messages!
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Patrick.McDermott_at_bedbath.com: "link speed on a V210"

    Relevant Pages

    • Re: Error Loading OS
      ... Hard Disk 1: ... Partition Basic NTFS Healthy 19.08 GB ... "John John" wrote: ... Open a Command Prompt: ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: C: working like a Dog!
      ... Then I try to use the command on the A: ... If it will not do a repair install, ... At that point I would pull the hard disk. ... stays in my laptop drive, the other is a 250GB drive that stay on my ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: Error Loading OS
      ... Open a Command Prompt: ... Secondly when I put it in the Run box Windows said it couldnt find it. ... When you paste the contents of the file here also tell us how many drives and partitions you have in the computer. ... My BIOS is set to Hard Disk and when I start my pc I get the "Error Loading ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: [Hdaps-devel] Re: IBM HDAPS things are looking up
      ... From what I'm told its not specific to hard disk, ... > drive parking its head. ... >> there is a command that will perform the desired ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: If there is a Corrupt/hang in a movie CD, could not copy to HDD
      ... Hard disk by `copy' command or `xcopy'. ... VCD's have NO copy protection that I'm aware of. ... more space on them to store the video data. ... This situation is likely causing problems with the copy command. ...
      (microsoft.public.windowsxp.general)