SUMMARY: Trouble connecting to a 3310 Array Using ssconsole
From: Dave Martini 1 (martini_at_mrpeabody.llnl.gov)
Date: Tue, 21 Sep 2004 15:01:00 -0700 (PDT) To: firstname.lastname@example.org
Well my brain deffiniely isn't working well today.
I was putting in the IP address of the ARRAY instead of the HOST under
server setup in the ssconsole GUI which is deffinitely why it didn't work.
I went through the configuration steps and now I can also telnet into the box.
Here's my original question.
I have a V250 with Solaris 9 on it.
I installed the CLI packages
1 SUNWsccli Sun StorEdge(tm) 3000 Family CLI
2 SUNWscsa Sun StorEdge(tm) Diagnostic Reporter daemon
3 SUNWscsd Sun StorEdge(tm) Configuration Service Agent
4 SUNWscsu Sun StorEdge(tm) Configuration Service Console
5 SUNWscui Sun StorEdge(tm) Diagnostic Reporter console
and The daemons are running
root 235 1 0 09:34:17 ? 0:00 /usr/sbin/ssmon
root 231 1 0 09:34:16 ? 0:00 /usr/sbin/ssserver
I can connect to the Array via the tip command no problem. I've configured the 3310 using
tip and can see the array no problem. I added an IP address to the 3310 and can ping the
Array from any host.
Trouble is when I execute ssconsole and add the array I get the "discovering" message
and it never connects to the array.
Are there any tricks to get ssconsole to connect to the 3310?
I was told by the SUN rep that I have to be able to telnet into the array before ssconsole
can connect. Is this correct? When I try to telnet into the array it just says trying to
connect but never does. I didn't notice any references to telnet in the CLI manual.
sunmanagers mailing list