SUMMARY: Prevent Solaris from broadcasting ARP for second interface over first interface.

From: Webpro (aielloster_at_gmail.com)
Date: 09/29/04

  • Next message: ALLEN, David: "Sun IP configuration"
    Date: Wed, 29 Sep 2004 09:28:57 -0700
    To: sunmanagers@sunmanagers.org
    
    

    I received just a couple responses. Unfortunately, no new "holy
    grail" procedures.

    What I have done already is disable ARP on the interface and create
    static ARP entries. This is an intrusive procedure that must be
    manually performed on each system. Having hundreds of these pairs
    makes this a challenging maintenance task.

    Joe

    On Tue, 28 Sep 2004 09:06:39 -0700, Webpro <aielloster@gmail.com> wrote:
    > I have a server configuration where a pair or servers are connected
    > via a x-over cable. They are connected to one or more LANs via other
    > interfaces. The private x-cover connection uses addresses in the
    > reserved ranges. Servers A and B are directly connected and servers D
    > and E are directly connected. e.g.
    >
    > Server A Server B
    > Public: 210.210.210.21 Public: 210.210.210.22
    > 10.10.210.21 Xover 10.10.210.22
    >
    > Server D Server E
    > Public: 210.210.210.23 Public: 210.210.210.24
    > 10.10.210.21 Xover 10.10.210.22
    >
    > We often see when server B x-over sends and ARP for 10.10.210.21, it
    > is sent out the public interface. Server D responds with it's private
    > interface MAC address (for its 10.10.210.21 IP address). Server A
    > updates its local ARP table with the MAC from server D. vital
    > communications between Server A and B over this x-over connection are
    > disrupted.
    >
    > I am not running ip forwarding or routed.
    >
    > I need to ensure the Solaris does not forward the ARP from the private
    > link to the public interface. I am not sure why it would since it is
    > locally connected and permanent.

    Joe

    -- 
    "Despite the hight cost of living, it still remains popular!"
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers
    

  • Next message: ALLEN, David: "Sun IP configuration"

    Relevant Pages

    • Re: Problem configuring NAT to share Internet Connection
      ... One of my NICs in the server connect to a DSL ... modem and it connects to internet. ... > interface, that connects to the DSL modem, LAN interface, that connects to ... >> 7.- To connect server to Internet, I create a new network connection. ...
      (microsoft.public.win2000.ras_routing)
    • Re: Cannot get NAT to route in RRAS
      ... ADSL Link was set as the Public interface in NAT, ... The static route also adds in fine using the ADSL Link interface, ... separate DNS server handles client’s requests, ... > Internet connection. ...
      (microsoft.public.win2000.ras_routing)
    • Re: Design issue with constructor arguments
      ... had just the server and the messager processor and all was good. ... class which manages a single socket connection on a single port. ... the server also provides the client interface for allowing those ... columns....and the constructors parameters are dependent on which way ...
      (comp.object)
    • Re: What signal tells my app that my DHCP lease just renewed?
      ... A client application that has a long-established connection. ... The redirection server would maintain a TCP connection ... A server application that is bound to a specific interface. ... In the case of network reconfiguration (such as an interface being ...
      (comp.os.linux.networking)
    • Re: VPN Disconnects
      ... Microsoft Windows 2000 Advanced Server ... A demand-dial Point-to-Point Tunneling Protocol (PPTP) connection between ... does not match the remote server's Demand-Dial interface. ...
      (microsoft.public.isa.vpn)