solaris8 and fibre channel RAID
From: . . (fabiofrait3_at_yahoo.com)
Date: 10/20/04
- Previous message: coyote_at_cojot.name: "ANNOUNCE: scsiinfo-4.7.0.15 available. Includes qlc, qus, mpt support."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Wed, 20 Oct 2004 06:45:03 -0700 (PDT) To: sunmanagers@sunmanagers.org
hi all,
i run a solaris 5.8 OS generic_108528-29 on a Sun 480.
I connected a EMC 500 RAID through two emulex lp 9802e cards.
After having installed the following packages (5.01 version):
lpfc
HBAniware
having added the following lines to the /kernel/drv/sd.conf file as follows:
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=0 lun=1;
name="sd" parent="lpfc" target=0 lun=2;
name="sd" parent="lpfc" target=0 lun=3;
name="sd" parent="lpfc" target=0 lun=4;
name="sd" parent="lpfc" target=0 lun=5;
name="sd" parent="lpfc" target=0 lun=6;
name="sd" parent="lpfc" target=0 lun=7;
and having rebooted the system (reboot -- -r)
i'm not able to see the RAID disks.
when the server is up the "format" command shows me:
c2t0d0 <drive type unknown>
/pci@8,600000/lpfc@1/sd@0,0
more, i see that the two emulex cards in the Sun480 shows the orange LED, other than the green one.
the probe-scsi-all command shows (at OK prompt):
/pci@8,600000/lpfc@1
target none ALPA WWPN 5600.0160.320.2a56
unit 0 disk DGC LUNZ 0207
May anyone help me?
thanks in advance
F
vote.yahoo.com - Register online to vote today!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Previous message: coyote_at_cojot.name: "ANNOUNCE: scsiinfo-4.7.0.15 available. Includes qlc, qus, mpt support."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
