V210 with quad fastethernet card

From: Tam Phan (tam.phan_at_gmail.com)
Date: 10/26/04

  • Next message: Dan O'Callaghan: "X86free and Sparc" 
    Date: Tue, 26 Oct 2004 07:59:42 -0600
To: sunmanagers@sunmanagers.org

    Hi all,

    My V210 box keep reseting after I installed the quad fastethernet
    card. I removed the quad card the box is booting up fine. I try to
    look for patch that can fix this problem from sun web site but I can
    not find any. Please advise

    Here is the message from the V210 box with quad card installed

    ebooting with command: boot
    Boot device: disk0:a File and args:
    SunOS Release 5.8 Version Generic_117000-03 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    WARNING: forceload of misc/md_trans failed
    WARNING: forceload of misc/md_raid failed
    WARNING: forceload of misc/md_hotspares failed
    Hardware watchdog enabled
    WARNING: pcisch-3: PCI fault log start:
    PCI TRDY# timeout error
    pcisch-3: PBM AFSR=0x82200000.20000000<mem-space> dwordmask=0 bytemask=0
    pcisch-3: PCI primary error (20):
    Master Abort
    pcisch-3: PCI secondary error (22):
    Master Abort
    TRDY# Timeout Error
    pcisch-3: PBM AFAR 0.00208484:
    WARNING: pcisch3: PCI config space CSR=0x22a0<received-master-abort>
    pcisch-3: PCI fault log end.

    Will summarize when the problem

    Thanks in advance
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Dan O'Callaghan: "X86free and Sparc"