EVA 5000 with V890

From: HALES, Brett (brett.hales_at_baesystems.com)
Date: 11/04/04

  • Next message: Divyaprakash K.C.: "Canon ImageRunner Installation" 
    To: sunmanagers@sunmanagers.org
Date: Thu, 04 Nov 2004 17:43:54 +1030

    Hi,

    I am currently trying to connect a SUN V890 to a HP EVA 5000 and was
    wondering if anybody has done this before?

    I have followed SUN's 'Sun StorEdge Traffic Manger Installation and
    Configuration Guide' however believe my problem lies with the
    /kernel/drv/scsi_vhci.conf configuration.

    There is a section that deals with 3rd party symmetric devices, however
    I can not find out what my Vendor ID/Product ID is for the EVA. I have
    tried using luxadm inquiry to display the Vendor ID/Product ID - it
    fails.

    If anybody has this running I would appreciate some assistance.

    --------------------------------------------------------------------

    luxadm inquiry /devices/pci@9,600000/SUNW,qlc@1/fp@0,0:fc

    Inappropriate ioctl for device -
    /devices/pci@9,600000/SUNW,qlc@1/fp@0,0:fc.

    --------------------------------------------------------------------

    # For enabling MPxIO support for 3rd party symmetric device need an
    # entry similar to following in this file. Just replace the "SUN
    SENA"
    # part with the Vendor ID/Product ID for the device, exactly as reported
    by
    # Inquiry cmd.
    #
    # This functionality requires patch 113039-02 (or higher).
    #
    # device-type-scsi-options-list =
    # "SUN SENA", "symmetric-option";
    #
    # symmetric-option = 0x1000000;
    # 

    -- 
HALES, Brett <brett.hales@baesystems.com>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
  • Next message: Divyaprakash K.C.: "Canon ImageRunner Installation"