JNI card connectivity with IBM ESS
From: Mohammed Sajid (msajidp_at_emirates.net.ae)
Date: 11/04/04
- Previous message: Divyaprakash K.C.: "Canon ImageRunner Installation"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Thu, 04 Nov 2004 13:01:20 +0400 To: sunmanagers@sunmanagers.org
Hi there,
I am ying to configure a JNI Fiber Card ( Supplied by SUN - SG-XPCI1FC) on a
V880 server in a SAN environment.The switch type is IBM 2109-F16 and the
Storage is IBM ESS 2105-F20.
I understand that I am suppose to use the jfca driver which comes with SUN
SAN foundation kit. I have loaded the kit and patches.
But the card doesn't attach with disk on the SAN. Probe scsi from OK prompt
shows disks and tape drives coonected on the switch. However, the ESS is not
getting recognised. Only 4 of the 6 tapes come online during the boot. No
disks at all though I have assigned a volume from ESS to this HBA. Following
the /var/adm/messages
Nov 1 13:06:04 gfserv jfca: [ID 549544 kern.info] jfca0: Hba: SUNW,jfca
Model: FCX-6562-L
Nov 1 13:06:04 gfserv jfca: [ID 218475 kern.info] jfca0: FCode: Version 1.2
[3478]
Nov 1 13:06:04 gfserv jfca: [ID 843335 kern.info] jfca0: IRQ: 1 Channel: 0
Nov 1 13:06:04 gfserv jfca: [ID 601529 kern.info] jfca0: SubVend: 1242 Sub:
656c Rev: b200 Vend: 1242 Dev: 1560
Nov 1 13:06:04 gfserv jfca: [ID 612238 kern.info] jfca0: WWNN:
1000000173017334 WWPN: 2000000173017334
Nov 1 13:06:05 gfserv jfca: [ID 204285 kern.info] jfca0: Auto-negotiating
link speed
Nov 1 13:06:05 gfserv jfca: [ID 550636 kern.info] jfca0: Topology
configuration is set to Auto-Negotiate
Nov 1 13:06:06 gfserv jfca: [ID 680699 kern.info] jfca0: SunFC JNI FCA
v20040630-1.30.2
Nov 1 13:06:06 gfserv jfca: [ID 904660 kern.info] jfca0: Sequencer Version:
4eng242
[ID 204285 kern.info] jfca0: Auto-negotiating link speed
Nov 1 13:06:09 gfserv jfca: [ID 550636 kern.info] jfca0: Topology
configuration is set to Auto-Negotiate
Nov 1 13:06:11 gfserv pcisch: [ID 370704 kern.info] PCI-device: SUNW,jfca@3,
jfca0
Nov 1 13:06:11 gfserv genunix: [ID 936769 kern.info] jfca0 is
/pci@8,700000/SUNW,jfca@3
Nov 1 13:06:11 gfserv genunix: [ID 936769 kern.info] fp3 is
/pci@8,700000/SUNW,jfca@3/fp@0,0
Nov 1 13:06:11 gfserv jfca: [ID 674267 kern.info] jfca0: Auto-Configured as
Fabric port
Nov 1 13:06:12 gfserv jfca: [ID 816969 kern.info] jfca0: Link Up: 1Gig
Fabric
Nov 1 13:06:14 gfserv fctl: [ID 517869 kern.warning] WARNING:
234=>fp(3)::PLOGI to 21000 failed. state=a reason=3.
Nov 1 13:06:14 gfserv fctl: [ID 517869 kern.warning] WARNING:
250=>fp(3)::PLOGI to 11100 failed. state=a reason=3.
Nov 1 13:06:14 gfserv fctl: [ID 517869 kern.warning] WARNING:
262=>fp(3)::PLOGI to 11000 failed. state=a reason=3.
Nov 1 13:06:14 gfserv fctl: [ID 517869 kern.warning] WARNING:
268=>fp(3)::PLOGI to 21100 failed. state=a reason=3.
Nov 1 13:06:14 gfserv fctl: [ID 517869 kern.warning] WARNING:
282=>fp(3)::N_x Port with D_ID=fffc01, PWWN=20fd00606912051b logged out 1
times; Giving up
Can anyone tell me how I can solve this problem?
jfca.conf is set to fabic mode and the switch mode is also on fabic mode.
What am I missing here? Any help would be appreciated.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Previous message: Divyaprakash K.C.: "Canon ImageRunner Installation"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
