Problems Booting up V1280

From: HRISHIKESH KULKARNI (hrk007_at_yahoo.com)
Date: 12/29/04

  • Next message: Josh: "Problems with Reflection X." 
    Date: Tue, 28 Dec 2004 16:23:41 -0800 (PST)
To: sunmanagers@sunmanagers.org

    Hi all,

     We have a SUNFIRE V1280 server which had its IB_SSC
    board replaced. After replacing the board and trying
    to boot up, we get the following messages.

    Hardware Reset... Test
           
     

    @(#) SYSTEM CONTROLLER(SC) POST 23 2002/03/22 18:03
     Test
     
    Local I2C LM75 Test
    PSR = 0x044010e5 TEMP2(CB
    PCR = 0x04004000 Test
     
            SelfTest running at DiagLevel:0x20
    Temparature : 28.0 Degree(C) CSR
     
    SC Boot PROM Testal I2C PCF8574 Test
       
            BootPROM CheckSum Testice
         Test
            CBH Register Ac
    IU Test Tes
    Console
            IU instruction set Testple
            CBH Register Access
            SRMMU TLB Read miss Test08timeout
    waiting for WRDY, status=0x6027800
            SRMMU page probe TestRDY,
    status=0x60278008ress not available.
            SRMMU segment probe Testess not
    available.
    MAC address
            SRMMU region probe Testching in
    MAC address is 0:0:0:0:0:0
            SRMMU context probe Testone
    Microsystems, Inc. All right
     

            
    IIep Internal Cache Testrosystems, Inc. All
    rights
            DCACHE RAM access Test license
    terms.
         
            DCACHE TAG access Te
           
    RTOS versio
     
       
            PCI Master Abort TestFailure,
    ID0 not installed
            PCIC Init Test
     

    PANIC: Fatal Software Error
    Memory Test
     
    java.la
            Memory Address Test
            at sun.serengeti.PlaceHelpe
    RIO Ebus Test Source)
            Rio Ebus Probe Test
            at sun.serengeti.util.Panic.
    RIO Ethernet Test Source)
            Rio Enet Probe Test
            at sun.serengeti.util.Panic
            Rio Ethernet Int Loopbacks Test
                       
            at su
    DUART(16552) InterSC TestSource)
       
            Loopback
    Testlang.Thread.run(Unknown Source)
            COM3 port
     
            COM4 port:16 noname lom: P
            Interrupt Test
                             
    Mon Dec
            COM3 port Intr #2Fatal
           
     
            CLK(Self) :0x0000ffff CLK(Other) : 0x00000000
               
    IU Test
            IU
            REF : 0x0000221fest
         
            CLOCK(SELF) FREQ : 75.2 MHZn access
      Test
            CLOCK(OTHER) FREQ : 0.0 MHZ Test
        
            FPU
    SBBC PCI Controller Testst
       
            SBBC PCI Config Space probe Test
                  
            SRMMU TLB
            SBBC Internal Reg Access Test
                  
            SRMMU TLB
            SBBC Interrupts Test
                  
                      
    SBBC Device2 Test Test
       
            BId&MFG Reg (SBBC Dev2) Test Read hit
                   Test
    SBBC Device3 Test
            DCACHE Write miss
            FRU Prsnt Reg (SBBC Dev3) Test
        
            DCACHE Write hit
    SBBC Device5 Test
       
            EPLD (SBBC Dev5)
                          
            TOD Interrupts Test
       
            PCIC Probe
    I2C Register Access Test
       
            Enable Mux Register Test
                                     
            Channel Mux Register Test
                                     
            Add Command Register Test
                                     
            Data Register TestAddress
                  Test
    Local I2C AT24C64 Test
    RIO Ebus Test
            EEPROM Device Test
    Test
            performing eeprom Test
     
            channel[00000001] Voltage(0x0000009A)
    :1.50erSC Test
            
            channel[00000002] Voltage(0x0000009E) :3.39
                            
            COM3 port
            channel[00000003] Voltage(0x00000099) :4.98
    Interrupt Test
            channel[00000004] Voltage(0x00000000) :0.0
      Intr #2
     
       
    Local I2C LM75 Test2
            TEMP0(IIep) Device Test
            System Clock verify
            Temparature : 18.50 Degree(C)
            Board0 Clock i
     
    Local I2C LM75 Test
            75M
            TEMP1(Rio) Device Test
                                     
            Temparature : 17.50 Degree(C)ffff CLK(Other) :
    0x00000
     
    Local I2C LM75
            Sc CSR Device Test
            SBBC PCI Config Space probe
    Console Bus Hub Test
        
            CBH Register Access Test
                                
        
    POST Complete.upts
    ERI Device Present
    Getting MAC address for SSC1rt1 interrupt generation
    Tes
    busyWait() timeout waiting for RRDY, status=0x6027c008
          
     
            Port0 interrupt generation Tests INT
    busyWait() timeout waiting for RRDY, status=0x6027c008
     
    SBBC Device0 Test
    busyWait() timeout waiting for RRDY, status=0x6027c008
                                           
    SBBC Device1
    busyWait() timeout waiting for WRDY,
    status=0x60278008RAM (SBBC Dev1)
                    
     
    Sun 1280 System Firmware Test
    RTOS version: 23
    TOD(M48
    ScApp version: 5.13.0012 LW8_build0.12
            TOD Init
    SC POST diag level: min
     
    The date is Monday, December 27, 2004, 5:16:50 AM PST.
    Test
        
     
    PANIC: No ID information.
     
    java.lang.Exception
            at sun.serengeti.util.Panic.log(Unknown
    Source)
            at sun.serengeti.ScApp.run(Unknown Source)
            at java.lang.Thread.run(Unknown Source)
     
     
     

    PANIC: Fatal Software Error
     
    java.lang.NullPointerException
            at sun.serengeti.PlaceHelper.findPlace(Unknown
    Source)
    Mon Dec 27 05:16:56 noname lom: PANIC: No ID
    information.
            at
    sun.serengeti.util.Panic.finishPanic(Unknown Source)
            at sun.serengeti.util.Panic.log(Unknown
    Source)
            at sun.serengeti.ScApp.run(Unknown Source)
            at java.lang.Thread.run(Unknown Source)
     

    Mon Dec 27 05:16:56 noname lom: PANIC: Fatal Software
    Error

    AT this points it does hardware eset adn above
    messages repeat. This cycle goes on. What could be the
    issue. I assume that board is seated correctly sinceit
    does boot up.

    Regards,
    Hrishi.

                    
    __________________________________
    Do you Yahoo!?
    Meet the all-new My Yahoo! - Try it today!
    http://my.yahoo.com
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Josh: "Problems with Reflection X."