Problem booting clone system

From: George Kahler (george_at_yorku.ca)
Date: 02/19/05

  • Next message: Anatoliy Lisovskiy: "Red state exception, Error enable reg" 
    Date: Fri, 18 Feb 2005 18:45:01 -0500 (EST)
To: sunmanagers@sunmanagers.org

    I have to clone a present production server running Sol8 Sun Ultra1
    hardware to a Sun 220R hardware.

    I keep getting the following boot errors.
    So far I have:
    o ufsdumped and restored from the production system /, /usr & /var via
      a third system onto the target system disk

    o set the boot PROM boot-file to kernel/unix

    o on the new target system I have booted from a CD into single user
      mode and used Joon Hansen advice to
      ok boot cdrom -s
      # mount /dev/dsk/c0t0d0s0 /a
      # devfsadm -r /a -p /a/etc/path_to_inst
      # umount /a
      # halt
      ok boot -r

    Any help is appreciated.
    George

    Rebooting with command: boot -r
    Boot device: /pci@1f,4000/scsi@3/disk@0,0 File and args: -r
    SunOS Release 5.8 Version Generic_117350-14 32-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Cannot assemble drivers for root /pci@1f,4000/scsi@3/disk@0,0:a
    Cannot mount root on /pci@1f,4000/scsi@3/disk@0,0:a fstype ufs

    panic[cpu0]/thread=10404000: vfs_mountroot: cannot mount root

    10403bb8 genunix:vfs_mountroot+68 (10424c00, 0, 0, 400, 80, 0)
      %l0-7: 10424c00 10427828 00000000 bf000000 00000000 1040b7d4 0009fcaf 00000000
    10403c18 genunix:main+8c (1, 2000, 1, ff00, fff2, f02)
      %l0-7: 10404000 0000f010 00248000 1041c530 10451098 00266c82 000b6470 00000000

    skipping system dump - no dump device configured
    rebooting...
    Resetting ...

    Any help you have to offer would be appreciated.
    George

    -------------------------------------------------------------------------------
    George Kahler e-mail: george@yorku.ca
    Sr. Systems Administrator humans: (416) 736-2100 x.22699
    Computing and Network Services machines: (416) 736-5830
    Ontario, Canada, M3J-1P3
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Anatoliy Lisovskiy: "Red state exception, Error enable reg"

    Relevant Pages

    • Re: E3000 boot problem
      ... I received a Sun E3000 and have a slight problem at boot time. ... Hardware Power ON ... 3,0>TODC battery is low bit set ...
      (comp.unix.solaris)
    • Re: E3000 boot problem
      ... I received a Sun E3000 and have a slight problem at boot time. ... Hardware Power ON ... 3,0>TODC battery is low bit set ...
      (comp.unix.solaris)
    • Re: REQUEST: development specs and manuals for the SparcStation 20
      ... x86 operating modes ... Thats basically the sort of information I would like to get for the Sun IPC ... involved when I run the command "boot disk" - where on the disk it expects ... I plan on writing them to request such information .. ...
      (comp.sys.sun.hardware)
    • Re: BSD cd creation problem
      ... > I recently was given 3 Sun Ultra Sparc systems, ... > error, "Can't open boot device". ... I am certain the CDROM ... Installing FreeBSD from CDROM or the Internet ...
      (comp.unix.bsd.freebsd.misc)
    • Re: E3000 boot problem
      ... I received a Sun E3000 and have a slight problem at boot time. ... hardware failure, but I'm unable at this stage to figure it out ...
      (comp.unix.solaris)