X.25 on SunFire 240 !

From: Ayaz Anjum (ayaz_at_mdsuae.ae)
Date: 02/19/05

  • Next message: Steven Sim: "maxphys, vxio and sd.conf" 
    To: <sunmanagers@sunmanagers.org>
Date: Sat, 19 Feb 2005 08:25:11 +0400

    Hello Guys !

    I am trying to configure X.25 software on Sun Fire 240 Server. What is have
    concluded is that /dev/zsh device is required for the X.25 software to be
    able to work. This device is not available on solaris 8 on SF 240. I have
    X.25 running on old ultra 1 where /dev/zsh exists. What is figured out is
    that /dev/zsh is for serial synchronous port however the Serial port on SF
    240 is asynchronous. I believe that old sun system's serial port support
    both synchronous /asynchronous modes.

    Any suggestions !

    I will summarize

    thanks
    Ayaz Anjum
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Steven Sim: "maxphys, vxio and sd.conf"

    Relevant Pages

    • Re: Problem updating bios V20Z. SP went ok, bios wont go and machines wont start anymore
      ... Procedure how to go back to the factory settings of the operating system of the Service Processor. ... Where to locate jumper 19 on the motherboard is described in document 817-5248 Sun Fire V20z and Sun Fire V40z Servers User Guide, ... Connect a PC or a laptop with a communication program like "CU" or "Minicom" for Linux or "Hyperterm" for MS Windows with a null-modem serial cable to the serial port on the V20z at the back. ...
      (comp.sys.sun.admin)
    • Re: Serial Ports on Sun Fire V480?
      ... I'm trying to access my Sun StorEdge 6320 Serial port. ... It looks like both the Sun Fire V480 and StorEdge 6320 use an RJ45 port for ... The serial to RJ45 adapter you're using from the Sun Fire 280R is likely ...
      (comp.sys.sun.admin)