SPARCserver 280r running Solaris 2.8 with attached T3 storage

From: Gursev Singh (gursev_at_gmail.com)
Date: 05/25/05

  • Next message: Melissa Young: "Set ACL on a directory, but setfacl not work under Solaris 2.6"
    Date: Wed, 25 May 2005 11:00:59 -0700
    To: sunmanagers@sunmanagers.org
    
    

    Hi! all

    I have a SPARCserver 280r running Solaris 2.8 with attached T3 storage.
    After installing recommend patch 8 from sun. My performance for the machine
    has gone down drastically. On boot it give me following errors

    forceload drv/atf failed
    forceload SUNW,qlc failed

    I need to get this machine working as soon as possible. Please
    Help! Send email and I will summarize to the list.

    Regards
    G
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Melissa Young: "Set ACL on a directory, but setfacl not work under Solaris 2.6"

    Relevant Pages

    • Re: REQUEST: development specs and manuals for the SparcStation 20
      ... x86 operating modes ... Thats basically the sort of information I would like to get for the Sun IPC ... involved when I run the command "boot disk" - where on the disk it expects ... I plan on writing them to request such information .. ...
      (comp.sys.sun.hardware)
    • Re: BSD cd creation problem
      ... > I recently was given 3 Sun Ultra Sparc systems, ... > error, "Can't open boot device". ... I am certain the CDROM ... Installing FreeBSD from CDROM or the Internet ...
      (comp.unix.bsd.freebsd.misc)
    • Re: E3000 boot problem
      ... I received a Sun E3000 and have a slight problem at boot time. ... hardware failure, but I'm unable at this stage to figure it out ...
      (comp.unix.solaris)
    • Re: Advice about SPARCStation IPX
      ... >> The problem is that the machine doesn't boot and it even doesn not ... >to presume that you don't have a Sun keyboard connected to it. ... >the TTYA serial port. ... >special connector needed to access TTYB. ...
      (comp.sys.sun.hardware)
    • Re: Cant open boot device
      ... The Ultra 60 Sun finally booted. ... My PROBLEM is the machine is HUNG. ... CD the boot process will go on. ... single disk I doubt there is one... ...
      (comp.unix.solaris)