[UPDATE] Can I install solaris 10 on a SPARCstation20 ?

From: PSI (sipark_m_at_fineit.net)
Date: 05/30/05

  • Next message: Suporte: "ULTRIX"
    To: "Sun Managers" <sunmanagers@sunmanagers.org>
    Date: Tue, 31 May 2005 00:24:40 +0900
    
    

    Thanks for many replies.

    I checked platform list through follow links :
    http://docs.sun.com/source/817-6337/chapterHPG.html
     
     But, I have expectation because "Minimum Hardware Requirements" of "System Requirements" of follow link :
     http://www.sun.com/software/solaris/specs.jsp
     
     Minimum Hardware Requirements
     Proper installation of Solaris 10 requires a SPARC-based or x64/x86-based system with:
     
       a.. Minimum of 256 MB of physical RAM (or 512 MB for PXE booting)
       b.. Minimum of 2 GB of available hard drive space
       c.. For SPARC platform-based processors, 250-MHz minimum
       d.. For x64- or x86-based processors, 120-MHz minimum
       e.. DVD or CD-ROM drive
     
     "For SPARC platform-based processors, 250-MHz minimum"
     
     SS20 is not included Supported Sun SPARC Platform for solaris 10 installed,
     but, I thought that the requirements "Minimum Hardware Requirements".
     
     
     
     Thanks & Regards,
     PSI
     
     
     ----- Original Message -----
    > From: "PSI" <sipark_m@fineit.net>
    > To: "Sun Managers" <sunmanagers@sunmanagers.org>
    > Sent: Monday, May 30, 2005 11:14 PM
    > Subject: Can I install solaris 10 on a SPARCstation20 ?
    >
    >
    > > Gurus.,
    > >
    > > I hope to install a solaris 10 on a SPARCstation 20. I saw Supported Sun
    > > SPARC Platform for solaris 10 installed.
    > >
    > > Follow link is it :
    > > http://docs.sun.com/source/817-6337/chapterHPG.html
    > >
    > > But, I download for solaris install. then is CD Burning(Using Nero Burning 5.x).
    > > and Insert Volume 1 CD to cdrom of SS20. Follow messages is display at my
    > > monitor of PC throught serial cable.
    > >
    > > <#0> ok boot cdrom
    > > Can't read disk label.
    > > Can't open disk label package
    > >
    > > Can't open boot device
    > >
    > >
    > > Is it impossible that install on SPARCstation 20 ?
    > >
    > >
    > >
    > > Thanks & Regards,
    > > PSI
    > > _______________________________________________
    > > sunmanagers mailing list
    > > sunmanagers@sunmanagers.org
    > > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Suporte: "ULTRIX"