Live Upgrade Help

From: Bhavesh Shah (bshah_at_citadon.com)
Date: 08/31/05

  • Next message: Bhavesh Shah: "UPDATE: Live Upgrade Help" 
    Date: Tue, 30 Aug 2005 16:01:22 -0700
To: <sunmanagers@sunmanagers.org>

    Hi Gurus,

    This is my first Live Upgrade so please bear with me if my questions
    sound silly.

    I am trying to do live upgrade from Solaris 2.6 to Solaris 8 and ran
    into following error:

    # lucreate -c "Solaris_26" -m /:/dev/dsk/c0t1d0s0:ufs -m
    /usr:/dev/dsk/c0t1d0s3:

    ufs -m /var:/dev/dsk/c0t1d0s4:ufs -m /opt:/dev/dsk/c0t1d06:ufs -m
    -:/dev/dsk/c0t

    1d0s1:swap -m /home:/dev/dsk/c0t1d0s5 -n "Solaris_8"

    Please wait while your system configuration is determined.

    No name for Current BE.

    Current BE is named <Solaris_26>.

    Creating initial configuration for primary BE <Solaris_26>.

    PBE configuration successful: PBE name <Solaris_26> PBE Boot Device
    </dev/dsk/c0t0d0s0>.

    Determining what file systems should be in the new BE.

    Searching /dev for possible BE filesystem devices

    luconfig: ERROR: Template filesystem definition failed for /opt..

    ERROR: Configuration of BE failed.

    I did the flowing steps to create a boot environment:

    1) Install Latest patch Cluster on Target Box

    2) Install SUNWluu and SUNWlur from Solaris 8 CD to target box.

    3) Created partition on Target box on second Disk

    4) Mount Jumstart /opt/install to target box as /install

    5) Ran lucreate to create a boot environment on target box second disk
    as below:

    # lucreate -c "Solaris_26" -m /:/dev/dsk/c0t1d0s0:ufs -m
    /usr:/dev/dsk/c0t1d0s3:

    ufs -m /var:/dev/dsk/c0t1d0s4:ufs -m /opt:/dev/dsk/c0t1d06:ufs -m
    -:/dev/dsk/c0t

    1d0s1:swap -m /home:/dev/dsk/c0t1d0s5 -n "Solaris_8"

    1) Do I need to create a file system with newfs? Or just partition will
    do?

    2) On Jumpstart Box what steps I need to follow besides creating a
    profile file which contains - "install_type upgrade" ?

    3) How do I select cluster type? Cluster SUNWCall?

    4) How do I select the Patch Cluster for Solaris 8 on jumpstart Box?

    Any help will be greatly appreciated

    TIA

    B
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Bhavesh Shah: "UPDATE: Live Upgrade Help"

    Relevant Pages

    • Re: Enable windows update for device driver search?
      ... The tact i would take is to fix the configuration in Target Designer. ... That new PMQ will list the unknown devices, ... Then try importing that PMQ into Component Designer and look at the ...
      (microsoft.public.windowsxp.embedded)
    • Re: boot problem
      ... in the center window), ... Assuming you have been able to run Target Analyzer, ... particularly 'Step 3 Create a New Configuration': ... > the installed the compact flash into the target system (it has a bootable ...
      (microsoft.public.windowsxp.embedded)
    • Re: System freeze for several minutes after startup
      ... I created a configuration based on running TAP on a customer's target, ... When I ran the image on that same target, ... creating a configuration based on running ... Once I got XPe working good on the system, ...
      (microsoft.public.windowsxp.embedded)
    • Re: Multiple Projects In VS2005 Solution
      ... single target, anyway. ... There is a Configuration Editor, accessible from the right click of the ... I left Debug and Release there. ... I tried to build a macro that would bring up the Batch-Build and select ...
      (microsoft.public.vstudio.development)
    • Re: Deploy Images to other computers
      ... You should differanciate your developement and target pc. ... xpe image should only be obtained on the target pc or an equivalent pc ... (the same hd and hardware configuration!). ... To put Windows XP Embedded running in a workstation, ...
      (microsoft.public.windowsxp.embedded)