UPDATE: L280 Libraries Issue - SCSI Transport Error

From: Bhavesh Shah (bshah_at_citadon.com)
Date: 09/28/05

  • Next message: Sammy: "SOS - 3310s not Partioning the same - partitions, logical drives," 
    Date: Tue, 27 Sep 2005 15:24:34 -0700
To: <sunmanagers@sunmanagers.org>

    At the OK prompt I can see the library but not the DLT Drive
    OK probe-scsi-all
    /pci@1f,0/pci@1/pci@1/scsi@f,1
    Target 1
      Unit 0 Removable Device type 8 HP C6280-7000 2.10

    -----Original Message-----
    From: Bhavesh Shah
    Sent: Tuesday, September 27, 2005 3:06 PM
    To: sunmanagers@sunmanagers.org
    Subject: L280 Libraries Issue - SCSI Transport Error

    Hi Gurus,
    I have Netra T105 with PCI SCSI Differential controller (symbios logic)
    where two L280 Tape Libraries are attached. From past week or so I am
    getting intermittent errors and my backup keeps failing. In
    /var/adm/messages I am getting errors "SCSI transport failed: reason
    'incomplete': giving up" and am unable to see the tape Drive(Drive is
    missing). I thaught it might be a loose Cable connection or
    terminatior/cable issue. So I tried to reseat the terminator/tried
    replacing the cable/terminator did not help. I am running Solaris 8
    (108528-23). I did iostat -E and found following:

    st7 Soft Errors: 0 Hard Errors: 0 Transport Errors: 241
    Vendor: QUANTUM Product: DLT7000 Revision: 2150 Serial No: qP
    st18 Soft Errors: 18 Hard Errors: 1133 Transport Errors: 87
    Vendor: QUANTUM Product: DLT7000 Revision: 2150 Serial No: qP

    Both the Tape libraries are almost new just 3 Months old. Am I missing
    some patches/parameters? Is this L280 issue? Or the issue is related to
    Bad HBA/Libraries? Both libraries are behaving the same way so I am kind
    of not suspecting tape libraries. Any help/Pointer will be greatly
    appreciated TIA B _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Sammy: "SOS - 3310s not Partioning the same - partitions, logical drives,"

    Relevant Pages

    • Re: orphaned port?
      ... checking if the linker is GNU ld... ... updating cache .././config.cache ... checking if libtool supports shared libraries... ...
      (freebsd-questions)
    • Re: How to display only 3 letters of a last name in field
      ... do you want to know which lines are "checked" in the reference window? ... I can do the task of unchecking the MISSING one, ... The References are the "extra" program libraries that Access needs to do its ... installed it, but does not exist on your work computer, it's "missing". ...
      (microsoft.public.access.queries)
    • Re: orphaned port?
      ... > updating cache ./config.cache ... > checking if libtool supports shared libraries... ...
      (freebsd-questions)
    • Re: Lib Errors After 6.3 - 7 Update
      ... freebsd-update.conf -r 7.0-RELEASE upgrade process. ... libphp.so missing there. ... issue with regard to installing VMware Tools. ... this point he has binaries with an inconsistent set of libraries that ...
      (freebsd-questions)
    • How to identify missing libraries in Excel (Office-XP) using VBA
      ... Consequently, I have in some way to identify missing libraries, i.e. ... libraries that in the VBA editor are found by looking for "MISSING ..." ... ' The next line is not acepted by Office-XP. ...
      (microsoft.public.excel.programming)