how to reset SunSAI/P port

From: B Bong (sunmoon208_at_yahoo.com)
Date: 10/26/05

  • Next message: Star Kitty: "smpatch unable to connect to update server" 
    Date: Wed, 26 Oct 2005 08:27:53 -0700 (PDT)
To: sunmanagers@sunmanagers.org

    Dear Sun Managers,

    I've a V210 with Solaris 8 having a Multi Port Serial
    Cards SunSAI/P, one of the port is hung and how can I
    reset that particular serial port of Multi Port Serial
    Cards. Anyone knows of what command to reset that port
    as rebooting the server could be not possible as other
    port is still working fine.

    Thanks in advance for your help.

    Regards,
    Nick

            
                    
    __________________________________
    Yahoo! Mail - PC Magazine Editors' Choice 2005
    http://mail.yahoo.com
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Star Kitty: "smpatch unable to connect to update server"

    Relevant Pages

    • nforce2 usb is broken on -stable
      ... the 2.0 boards lock up on boot during the uhub0 bus ... While I can boot without the devices and attach them later, ... cause the box to reset. ... ohci_root_ctrl_transfer: writing reset to port ...
      (freebsd-stable)
    • Re: reading the ROM BIOS
      ... to a HLT instruction, which I found puzzling, since it looked like nothing ... Thus, the mouse is reset and there is other dialogue with ports 60h and 64h, ... couched in terms such as MCA, EISA, AT+, PCI, etc., that are not entirely ... whereas Gilluwe describes the port e0h as the Split Address Register ...
      (comp.os.linux.misc)
    • Re: Can a signal be resolved as most recent event wins?
      ... port map ( ... -- waits 5 clock cycles after reset. ... the busmaster with other parts of the testbench. ...
      (comp.lang.vhdl)
    • Re: Aminocom Aminet boxes.
      ... these boxes, nobody wants to give information out. ... No switches but there is a space on the board for one, it's a reset ... which I suspect has to be the back end server control port but I can't ... There's a serial port on the back and an unpopulated serial port-ish ...
      (uk.tech.digital-tv)
    • Re: Aminocom Aminet boxes.
      ... No switches but there is a space on the board for one, it's a reset switch but I don't fancy holding it down and powering up, there's only three of these with firmware and I don't want to provoke them into erasing it if I can help it. ... The box is IBM PPC based running embedded Linux 2.4, there's 16MB RAM and 8MB flash, two ports open on the working boxes, Telnet and 54321 which I suspect has to be the back end server control port but I can't seem to provoke any response from it. ... I think it uses something called JMACX which appears to be a proprietary protocol or control language on this port. ... There's a serial port on the back and an unpopulated serial port-ish connector inside, I'm going to play with them this weekend to see if I can get a shell.. ...
      (uk.tech.digital-tv)
    • Quantcast