How to rebuild data from defective hard disk from 3510FC

From: Baby David (baby.david_at_celstream.com)
Date: 11/23/05

  • Next message: Karl.Rossing_at_Federated.CA: "6130 Admin Console Error"
    Date: Wed, 23 Nov 2005 10:01:56 +0530
    To: <sunmanagers@sunmanagers.org>
    
    

    Hi Gurus,

                    I have a Sun V440 Server connected with Sun 3510FC. Now
    a disk(146GB) got failed in a logical drive (Raid 5). It also has a
    local spare disk, when the system tried to rebuild the data in to spare
    disk it gave a error "Warning Bad block encountered 136983314(311). I
    replaced the failed one with new one and did the manual rebuild after
    47% of data transfer it is giving the same error.

    Pls. help me to solve this issue,

    David

    This message is free from Virus - IMSS
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers


  • Next message: Karl.Rossing_at_Federated.CA: "6130 Admin Console Error"

    Relevant Pages

    • rebuild problems with ata-raid on array with freebsd native meta
      ... First of all i have a intel se7520jr2 motherboard with SATA RAID ... by creating RAID1 array in LSI Integrated RAID ... but `atacontrol rebuild ar0` always had had ENXIO ...
      (freebsd-current)
    • Re: SiI RAID 1 Problems: "You can not rebuild"
      ... Used Maxtor Power Max utility to scan for errors on my hard drives. ... Rebooted and entered the RAID utility. ... Create a new mirrored set, ... I then perform an online rebuild (which runs in the ...
      (microsoft.public.windowsxp.general)
    • Re: Bad RAID Configuration Need Rebuild 1st DC
      ... I'm told that there is a bad strip any attempts to rebuild fail even though ... So I'm looking for the best solution to backup and restore this DC! ... > I understand you one stripe is broken in the OS RAID 1 on one of your DCs. ...
      (microsoft.public.windows.server.setup)
    • Re: URGENT: Need help rebuilding iir RAID5 array with failed drive
      ... You should be able to do whatever rebuild operations ... >> you need in the BIOS I believe, but that would be an offline operation, ... > Please DONT use FreeBSD to rebuild this RAID5 unit. ... > even let you rebuild the raid. ...
      (freebsd-current)
    • Re: Paul and Old Man: Cannot fix RAID5 failure ...
      ... all of the sudden the Intel Matrix Storage ROM showed Rebuild status. ... When booting form RAID, there is some activity while the screen is black, ... Considering 3 SATA drives spining up after powerdown may cause a 12V ... I was considering a parallel WinXP installation on a 4th disk, ...
      (alt.comp.periphs.mainboard.asus)