T3 continuously loops on booting

From: Peter Stokes (peter_at_ashlyn.co.uk)
Date: 11/29/05

  • Next message: Tim Bingham: "SUMMARY: Solaris 9 Upgrade Installation Hangs" 
    Date: Tue, 29 Nov 2005 11:50:14 +0000
To: sunmanagers@sunmanagers.org

    Hi All

    I have been trying to update a T3 I have and have now got myself into a
    catch 22.

    I updated all of the disks to latest firmware
    I checked the T3 had the latest EP and System firmware
    I checked the other versions which appeared ok.
    I boot -i'd the new image file and that worked ok.

    I then tried to create a new volume which hung

    vol add v0 u1d1-9 raid 5

    The unit now just boots (even from tftp boot which I have also tried)
    and gets to where you expect to login and starts again at the EP boot.
    This loop then carries on forever.

    I have tried removing the disks and another controller, so am at a loss
    what is the next step to get back to normality!!

    Any help appreciated.

    Peter
    _______________________________________________
    sunmanagers mailing list
    sunmanagers@sunmanagers.org
    http://www.sunmanagers.org/mailman/listinfo/sunmanagers

  • Next message: Tim Bingham: "SUMMARY: Solaris 9 Upgrade Installation Hangs"

    Relevant Pages

    • Re: booting and fiber disks
      ... system is not scanning the disks for another boot device, ... Subject: Re: booting and fiber disks ... Dave Zarnoch ...
      (AIX-L)
    • Re: MicroVAX 3500 questions
      ... It's an inconvenience but the system will boot without it. ... etc are disks ... Ive put some images of the four ports, label and cards on google: ... 1* DELQA Ethernet controller ...
      (comp.sys.dec)
    • Re: Installing Win2K Pro
      ... "Create Boot Disks" says to run MakeBoot.exe from the BootDisk folder ... on the Win2K CD-ROM. ... This creates 4 floppy disks. ...
      (microsoft.public.win2000.general)
    • Re: Old Possums book of practical hosts.
      ... The LVs are happily moving from old disks to ... I'll just boot of the CD and quickly fix it from rescue ... Except to have 6 disks on-line at once, I needed an extra controller. ... I hate PCs. ...
      (alt.sysadmin.recovery)
    • Re: mounting LVM partitions fails after etch upgrade
      ... RAID1 would not mount cleanly anymore after upgrade from sarge to ... disks, and found out what was wrong. ... > the first problem is that during boot, ... mounted filesystem with ordered data mode. ...
      (Debian-User)