Problems bringing up domains in a E10000 - Panic Boot

Hi Managers,

This is the first time I write to the list, I'm a kind of newbie using
solaris and at work I have an E10000 server.

So the big, big problem is that it stops working :( and all I know about
bringing up the domains in the E10000 server doesn't work...

Here is the output of some commands at the OBP:

<#8> ok boot disk0 -r
Rebooting with command: boot disk0 -r
Boot device: /sbus@49,0/SUNW,qfe@0,8c00000 File and args: disk0 -r
Timeout waiting for ARP/RARP packet
23a00 hostname: webaplic
whoami: no domain name
root server: sspaplic
root directory: /cdrom/sol_7_1199_sparc_sun_srvr/s0/Solaris_2.7/Tools/Boot
panic - boot: Could not mount filesystem.
Program terminated
<#8> ok


<#8> ok boot disk1 -r
Rebooting with command: boot disk1 -r
Boot device: /sbus@49,0/SUNW,qfe@0,8c00000 File and args: disk1 -r
Timeout waiting for ARP/RARP packet
23a00 hostname: webaplic
whoami: no domain name
root server: sspaplic
root directory: /cdrom/sol_7_1199_sparc_sun_srvr/s0/Solaris_2.7/Tools/Boot
panic - boot: Could not mount filesystem.
Program terminated
<#8> ok


<#8> ok show-disks
a) /sbus@4c,0/SUNW,socal@1,0/sf@1,0/ssd
b) /sbus@4c,0/SUNW,socal@1,0/sf@0,0/ssd
c) /sbus@4c,0/QLGC,isp@0,10000/sd
d) /sbus@48,0/SUNW,socal@1,0/sf@1,0/ssd
e) /sbus@48,0/SUNW,socal@1,0/sf@0,0/ssd
f) /sbus@48,0/QLGC,isp@0,10000/sd
q) NO SELECTION
<#8> ok


<#8> ok devalias
net /sbus@49,0/SUNW,qfe@0,8c00000
disk /sbus@48,0/QLGC,isp@0,10000/sd@0,0:a
ttya /ssp-serial
ssa_b_example /sbus@40,0/SUNW,soc@0,0/SUNW,pln@b0000000,XXXXXX/SUNW
,ssd@0,0:a
ssa_a_example /sbus@40,0/SUNW,soc@0,0/SUNW,pln@a0000000,XXXXXX/SUNW
,ssd@0,0:a
isp_example /sbus@40,0/QLGC,isp@0,10000/sd@0,0
net_example /sbus@40,0/qec@0,20000/qe@0,0
name aliases
<#8> ok


<#8> ok printenv boot-device
boot-device
= /sbus@48,0/SUNW,socal@0,0/sf@0,0/ssd@w22000020374f4c09,0:a disk
diskbrd diskisp disksoc net
<#8> ok

<#8> ok printenv diag-device
diag-device = disk diskbrd diskisp disksoc net
<#8> ok

<#8> ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/sbus@4c,0/QLGC,isp@0,10000
Target 0
Unit 0 Disk SEAGATE ST39103LCSUN9.0G034A9944632001
Copyright (c) 1999 Seagate
All rights reserved
Target 1
Unit 0 Disk SEAGATE ST39103LCSUN9.0G034A9944632967
Copyright (c) 1999 Seagate
All rights reserved
Target e
Unit 0 Processor SYMBIOS D1000 2 NvC SAF-TE1.00

/sbus@48,0/QLGC,isp@0,10000
<#8> ok

As you can see I got an panic boot could not mount filesystem. I've not only
the E10000 server I also have a disk array A5000 one of data and other for
booting.

I will really appreciate any idea or suggestion, and of course I will
summarize my results. Thanks in advance.

- Juan Carlos G. Velasco
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • Re: Cant log into FC4, display keeps going "out of range"
    ... > Worked fine until the regular X server start during boot up. ... > In Grub I've tried seeing if I can access the xorg.conf file so I can ... I can think of 2 things to try to get to a command line: ...
    (comp.os.linux.misc)
  • Re: [SLE] Staring programs at boot - first time at doing this
    ... my SuSE 10 server boots to runlevel 3. ... If I put it into boot-local, it looks as if this command will run before ... this is the first time I've looked seriously at a boot script. ... I think you're saying that you have a separate script - postgresql_user ...
    (SuSE)
  • Re: Asktime and ntp problem on 5.0.7
    ... >> server 127.127.1.0 ... sets the default route prior to executing the ntp section. ... On the two new 5.0.7 system I set up, the ntpdate command ... > several quick boot up cycles can be days off. ...
    (comp.unix.sco.misc)
  • Re: Change Partition Sizes
    ... DUT as a slave disk in that PC, ... > What command and command line options should I use? ... > I have an external USB Hard drive I could attach to the server. ... You must then boot into the Recovery Console ...
    (microsoft.public.win2000.general)
  • [1/3] POHMELFS high performance network filesystem. Documentation.
    ... +POHMELFS: Parallel Optimized Host Message Exchange Layered File System. ... * Fast and scalable multithreaded userspace server. ... * Client is able to switch between different servers (if one goes down, ... +command (or set of commands, which is frequently used during data writing: ...
    (Linux-Kernel)