V880 with A5000 via 375-0040 (FC-AL HBA FC100/P)

Hello Sunmanagers !!!

We can't "see" the A500 disks from the V880 with Solaris8. We use the
same optic HBA and the same Array with a E-250 with Solaris8 and
everything works just fine. Although at the SUN Handbook this particular
HBA is not shown, we've seen (over the INTERNET) people using it.
We have a positive signal indication at the Array display.
We installed all patches and packages as we did in the E-450.
The HBA in connected to the V880's PCI slot 1

Thanks,

Alex



_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • Re: Rules of the Road for Fibre Channel Interop
    ... I could read from the array, ... I have no idea what the problem is, I suspect that the SOC+ (Sun's 100MB/s ... PC with both an LSI FC909 HBA, ... fancy 64-bit PCI cards in a vanilla 32-bit PCI desktop). ...
    (comp.sys.sun.admin)
  • Re: Rules of the Road for Fibre Channel Interop
    ... I could read from the array, ... I have no idea what the problem is, I suspect that the SOC+ (Sun's 100MB/s ... PC with both an LSI FC909 HBA, ... fancy 64-bit PCI cards in a vanilla 32-bit PCI desktop). ...
    (comp.sys.sun.hardware)
  • Octane + fibre channel fc 5300 - cant see device!
    ... I bought a used fibre channel array badged Fujitsu Siemens with 10 x ... I try to connect it to XIO FC HBA in Octane via ... impossible to use array without Clariion Raid software from SGI? ...
    (comp.sys.sgi.admin)
  • Problem changing fiber channel configuration
    ... I have a v240 attached to an external fiber disk array via a Sun ... The array has been working correctly when the hba ... I don't see any configuration ...
    (comp.unix.solaris)