Summary SCSI card drivers
- From: stan <stanb@xxxxxxxxx>
- Date: Tue, 28 Feb 2006 15:33:27 -0500
On Sun, Feb 26, 2006 at 02:20:05PM -0500, stan wrote:
I'm exploring the brave new world of (to me) SCSI card support under
Soalris X86. I've got a couple of questions.
One of the cards that I need to use (to support the old tape drive I'm
replacing) is an Adaptec 29160 (LVD). I found the following via a Goggle
search.
http://tinyurl.com/jep33
Is there any possibility that drivers for earlier versions of Soalris X86
will work with V10 X86 64bit?
If so, how would I install them. The instructions for installing this
discuss the use of a floppy drive, which my machine does not have. Could I
plug in a USB floppy, and get it to work?
The also discuss "device manager floppy", which I also don't have. Where
could I get this?
Thanks for helping out a newbie here.
Turns out that this card is suposed to eb supported by a native driver in
Soalris 10. I should eb able to set it up with devfsadm -C -v, but this
panics my machine.
--
U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror
- New York Times 9/3/1967
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- References:
- SCSI card drivers
- From: stan
- SCSI card drivers
- Prev by Date: Summary Getting a tape device to work in Solaris 10
- Next by Date: Summary ntp setup on Solaris 10?
- Previous by thread: SCSI card drivers
- Next by thread: iscda.sh for Solaris 10?
- Index(es):
Relevant Pages
|
|
