System crashing in loop
- From: Tim Longo <tlongo@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 26 Jun 2006 09:21:13 -0400
My Sunblade 100 has developed a problem. The machine seems
to be running normally, but will crash and end up in a state
that seems like an endless loop.
What I see on the screen after the crash, is what looks like
a bunch of garbage characters, then about thirty or forty
lines that say:
"ok Rejecting alloc-mem!"
The cycle then repeats.
The only way out of this loop, is to power off the system
and restart. It will run ok for awhile, and then go back
into this loop. I am now trying to determine the cause.
I've not found anything useful in the logs. Only normal
startup message from each time I've restarted the system.
Please respond with any suggestions, but I am going to
assume a hardware fault and try replacing some components
and restarting.
Thanks.
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Follow-Ups:
- Summary: System crashing in loop
- From: Tim Longo
- Summary: System crashing in loop
- Prev by Date: Deleting text in front
- Next by Date: TCP/IP failover under Plain Solaris 8
- Previous by thread: Deleting text in front
- Next by thread: Summary: System crashing in loop
- Index(es):
Relevant Pages
|
|
