SUMMARY: prtdiag -v not showing onboard nic on v880

Thanks to:

Lineberger, Aaron <alineberger@xxxxxxxxxxxxxx>
Scott.Lawson@xxxxxxxxxxxxx <Scott.Lawson@xxxxxxxxxxxxx>

For the easy solution of 'ifconfig -a plumb'

Also thanks to:
Todd Wilkinson <todd.wilkinson@xxxxxxxxx>

for using 'kstat' to probe, but it is very long winded.

Regards
Johnny
**

On 29/06/06, Johnny Tran <jtjtjt@xxxxxxxxx> wrote:

Hi SunManagers.

Below is the output of a prtdiag -v. However I know that a V880 has two
onboard network interfaces, eri0(100-Base TX) and ge0(1Gb-Ethernet).
The only way I found the onboard NICs was via the /etc/path_to_inst file.
Is there any other way of deteching these onboard NICs?

Regards
Johnny


# /usr/platform/`uname -i`/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Fire 880
System clock frequency: 150 MHz
Memory size: 8192 Megabytes

========================= CPUs
===============================================

Run E$ CPU CPU
Brd CPU MHz MB Impl. Mask
--- --- ---- ---- ------- ----
A 0 750 8.0 US-III 5.4
B 1 750 8.0 US-III 5.4
A 2 750 8.0 US-III 5.4
B 3 750 8.0 US-III 5.4

========================= Memory Configuration
===============================

Logical Logical Logical
MC Bank Bank Bank DIMM Interleave Interleaved
Brd ID num size Status Size Factor with
---- --- ---- ------ ----------- ------ ---------- -----------
A 0 0 512MB no_status 256MB 8-way 0
A 0 1 512MB no_status 256MB 8-way 0
A 0 2 512MB no_status 256MB 8-way 0
A 0 3 512MB no_status 256MB 8-way 0
B 1 0 512MB no_status 256MB 8-way 1
B 1 1 512MB no_status 256MB 8-way 1
B 1 2 512MB no_status 256MB 8-way 1
B 1 3 512MB no_status 256MB 8-way 1
A 2 0 512MB no_status 256MB 8-way 0
A 2 1 512MB no_status 256MB 8-way 0
A 2 2 512MB no_status 256MB 8-way 0
A 2 3 512MB no_status 256MB 8-way 0
B 3 0 512MB no_status 256MB 8-way 1
B 3 1 512MB no_status 256MB 8-way 1
B 3 2 512MB no_status 256MB 8-way 1
B 3 3 512MB no_status 256MB 8-way 1

========================= IO Cards =========================


Bus Max
IO Port Bus Freq Bus Dev,
Brd Type ID Side Slot MHz Freq Func State
Name Model
---- ---- ---- ---- ---- ---- ---- ---- -----
-------------------------------- ----------------------
I/O PCI 9 B 6 33 33 2,0 ok pci-pci8086,b154.0/pci108e,1000
PCI-BRIDGE
I/O PCI 9 B 6 33 33 0,0 ok pci108e,1000-pci108e, 1000.1
device on pci-bridge
I/O PCI 9 B 6 33 33 0,1 ok
SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 6 33 33 1,0 ok pci108e,1000-pci108e,1000.1
device on pci-bridge
I/O PCI 9 B 6 33 33 1,1 ok
SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 6 33 33 2,0 ok pci108e,1000-pci108e,1000.1
device on pci-bridge
I/O PCI 9 B 6 33 33 2,1 ok
SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 6 33 33 3,0 ok pci108e,1000-pci108e,1000.1
device on pci-bridge
I/O PCI 9 B 6 33 33 3,1 ok
SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 A 8 66 66 1,0 ok network-pci108e, abba.11
SUNW,pci-ce
I/O PCI 9 A 7 66 66 2,0 ok network-pci108e,abba.11
SUNW,pci-ce

No failures found in System
===========================


========================= Environmental Status =========================

System Temperatures (Celsius):
-------------------------------
Device Temperature Status
---------------------------------------
CPU0 71 OK
CPU1 71 OK
CPU2 62 OK
CPU3 60 OK
MB 30 OK
IOB 24 OK
DBP0 23 OK

=================================

Front Status Panel:
-------------------
Keyswitch position: NORMAL

System LED Status:
GEN FAULT REMOVE
[OFF] [OFF]

DISK FAULT POWER FAULT
[OFF] [OFF]

LEFT THERMAL FAULT RIGHT THERMAL FAULT
[OFF] [OFF]

LEFT DOOR RIGHT DOOR
[OFF] [OFF]

=================================

Disk Status:
Presence Fault LED Remove LED
DISK 0: [PRESENT] [OFF] [OFF]
DISK 1: [PRESENT] [OFF] [OFF]
DISK 2: [PRESENT] [OFF] [OFF]
DISK 3: [PRESENT] [OFF] [OFF]
DISK 4: [PRESENT] [OFF] [OFF]
DISK 5: [PRESENT] [OFF] [OFF]
DISK 6: [ EMPTY]
DISK 7: [ EMPTY]
DISK 8: [ EMPTY]
DISK 9: [ EMPTY]
DISK 10: [ EMPTY]
DISK 11: [ EMPTY]

=================================

Fan Bank :
----------

Bank Speed Status Fan State
( RPMS )
---- -------- --------- ---------
CPU0_PRIM_FAN 2380 [ENABLED] OK
CPU1_PRIM_FAN 2439 [ENABLED] OK
CPU0_SEC_FAN 0 [DISABLED] OK
CPU1_SEC_FAN 0 [DISABLED] OK
IO0_PRIM_FAN 3846 [ENABLED] OK
IO1_PRIM_FAN 3896 [ENABLED] OK
IO0_SEC_FAN 0 [DISABLED] OK
IO1_SEC_FAN 0 [DISABLED] OK
IO_BRIDGE_PRIM_FAN 3409 [ENABLED] OK
IO_BRIDGE_SEC_FAN 0 [DISABLED] OK

=================================

Power Supplies:
---------------

Supply Status Fan Fail Temp Fail CS Fail 3.3V 5V 12V 48V
------ ------------ -------- --------- ------- ---- -- --- ---
PS0 GOOD 6 4 2 3
PS1 GOOD 6 4 2 3
PS2 GOOD 6 4 2 3


========================= HW Revisions
=======================================

System PROM revisions:
----------------------
OBP 4.4.7 2001/11/14 08:51

IO ASIC revisions:
------------------
Port
Brd Model ID Status Version
---- --------------- ---- ------ -------
IB-1 unknown 8 ok 4
IB-1 unknown 9 ok 4
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • tell Bob its filthy shouting on a tag
    ... recommend the blunt puddle. ... Tell Andrew it's empty attempting ... over a disk. ...
    (uk.sport.football.clubs.liverpool)
  • help! picld error - is it a hardware issue?
    ... Unable to load configuration '/var/ldap/ ... Disk Status: ... DISK 6: [EMPTY] ... General system failure ...
    (SunManagers)
  • Re: Recycle Bin Wont Empty
    ... Run Error Checking then try to Empty the Recycle Bin. ... In My Computer or Windows Explorer, right-click the drive you want to ... the disk checking for the next time you restart your computer. ... to select Automatically fix file system errors. ...
    (microsoft.public.windowsxp.hardware)
  • prtdiag -v not showing onboard nic on v880
    ... onboard network interfaces, eri0and ge0. ... device on pci-bridge ... Disk Status: ... DISK 6: [EMPTY] ...
    (SunManagers)