IP address of ssh/telnet client THANK YOU!

To all;

To every single person who replied, a VERY BIG THANK YOU. There were so
many replies!!!!!!!!!!!

This is an AWESOME AWESOME list.

Most (almost all) suggested using "who -m".

Others suggested using ssh's inherent abilities, either using the "-x"
switch or setting the SSH windows client for X Forwarding by default.

Some suggested using the "last" command and using the usual
"sed/awk/cut/head" to obtain the display.

Almost all of the methods worked!

THANKS TO ALL!

Warmest Regards
Steven Sim




Fujitsu Asia Pte. Ltd.
_____________________________________________________

This e-mail is confidential and may also be privileged. If you are not the intended recipient, please notify us immediately. You should not copy or use it for any purpose, nor disclose its contents to any other person.

Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it.
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • unusable feature: LocalCommand
    ... Specifies a command to execute on the local machine after suc- ... What it doesn't say is that the SSH connection, though established, cannot be ... used by that local command being executed. ... run a command that makes use of that port forwarding. ...
    (comp.security.ssh)
  • Re: How to remotely connect to linux machine and then use GUI software on it?
    ... There is a cygwin window pop-up and it has the following prompt: ... How can I Enable X forwarding in your SSH client ... but get "bash:ssh: command not found". ... >Enable X forwarding in your SSH client. ...
    (comp.os.linux.networking)
  • Re: kern/106722: [net] [patch] ifconfig may not connect an interface to known network
    ... Introduce RTM_CHANGEADD, a command that will forcibly add route, ... Use this command in in_addprefix. ... Approach 1 is largely irrelevant if multiple paths are introduced to the network stack; there is then no concept of a conflicting forwarding entry, only preference derived from the interface, entry flags, or the entry itself. ...
    (freebsd-net)
  • Re: Remote Host issue
    ... I have gone into my linksys router in the ... forwarding page and entered what I think is correct..entered 3389 "to" 3389, ... Ext Port - is this for the 3389 I have read about, ... At the resulting command line type the command ipconfig and note the reported IP address. ...
    (microsoft.public.windowsxp.work_remotely)