Quantum LTO-3 configuration problem with Solaris 2.8
- From: Z H <ssefoen@xxxxxxxxx>
- Date: Sat, 29 Jul 2006 14:12:53 -0700 (PDT)
To All:
I have a V880 running Solaris 2.8
Just patched the st driver with 108725-24.
Installed a UltraSCSI 320 HBA and the probe-scsi-all can see both the HBA and the LTO3 tape drive.
pci@8,700000/scsi@2,1
/pci@8,700000/scsi@2
Target 6
Unit 0 Removable Tape CERTANCEULTRIUM 3 1856
After running boot -r from ok prompt, the system does not create a device under /dev/rmt directory.
here is the st.conf
name="st" class="scsi"
target=0 lun=0;
name="st" class="scsi"
target=1 lun=0;
name="st" class="scsi"
target=2 lun=0;
name="st" class="scsi"
target=3 lun=0;
name="st" class="scsi"
target=4 lun=0;
name="st" class="scsi"
target=5 lun=0;
name="st" class="scsi"
target=6 lun=0;
#
# In case there are wide tape drives, one can use these targets
#
#name="st" class="scsi"
# target=8 lun=0;
#name="st" class="scsi"
# target=9 lun=0;
#name="st" class="scsi"
# target=10 lun=0;
#name="st" class="scsi"
# target=11 lun=0;
#name="st" class="scsi"
# target=12 lun=0;
#name="st" class="scsi"
# target=13 lun=0;
#name="st" class="scsi"
# target=14 lun=0;
#name="st" class="scsi"
# target=15 lun=0;
# This line adds support for Fibre Channel Tapes
name="st" parent="fp" target=0;
Any tip will be greatly appreciated.
ssefoen
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1"/min.
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Prev by Date: SUMMARY: WGET sunsolve.sun.com patches
- Next by Date: Solaris dropping to an OK prompt
- Previous by thread: SUMMARY: WGET sunsolve.sun.com patches
- Next by thread: Solaris dropping to an OK prompt
- Index(es):
Relevant Pages
|
|
