cfgadm is not successfull to unconfigure the disks

Hi All,

There was a disk named d6 in my cluster configuration. I have removed that
disk from the diskset. I need to take that disk completely from the cluster
nodes. However, when I run the following, it gives the following. On the other
hand, for the other node, that command finishes successfully. Is there
anything missed on the sun cluster side for that node? What do you suggest?

Regards,





root@umms02 # cfgadm -c unconfigure c4::50060e8000c3aa81

cfgadm: Library error: failed to offline:
/devices/scsi_vhci/ssd@g4849544143484920443630483333343230313637

Resource
Information

----------------------------------------------------------
---------------------------------------------------

/dev/rdsk/c6t4849544143484920443630483333343230313637d0s2 Sun Cluster Disk
(DID=/dev/did/rdsk/d6, DGs=dsk/d6)

root@umms02 # cfgadm -c unconfigure c4::50060e8000c3aa84

cfgadm: Library error: failed to offline:
/devices/scsi_vhci/ssd@g4849544143484920443630483333343230313637

Resource
Information

----------------------------------------------------------
---------------------------------------------------

/dev/rdsk/c6t4849544143484920443630483333343230313637d0s2 Sun Cluster Disk
(DID=/dev/did/rdsk/d6, DGs=dsk/d6)
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • SUMMARY: changed WWID on cluster member boot disk
    ... disk and quorum disk of a single-member cluster, ... I could no longer boot from the cluster disks, ... the pre-cluster stand-alone system disk; ... the root1_domain on LUN containing the member boot disk was found ...
    (Tru64-UNIX-Managers)
  • Join an existing cluster
    ... I had a cluster setup with 2 computers running windows ... shared disk array. ... Creating a dummy Local Quorum resource. ... on the same storage bus as the boot disk... ...
    (microsoft.public.windows.server.clustering)
  • Re: Creating a wide area VMS Cluster
    ... > My goal is to provide a disaster tolerant cluster for both OS and data. ... disrupting the balance of the effect of votes between sites A and B. ... You have the option of a single shadowed system disk between the ...
    (comp.os.vms)
  • RE: Cluster IP Address Does not fail over
    ... The cluster IP has no dependicies at all. ... Node1 disk manager sees LUN5. ... [DiskArb] ...
    (microsoft.public.windows.server.clustering)
  • Re: Windows 2003/SQL 2000 Cluster SAN Migration
    ... Isin't the W2K3 Cluster Server Recovery tool designed to ... > 4) assume the Old disk drive is O: and the New disk Drive is N: ... > 4) Create a new Disk Resource for the new disk and have that in the SQL ... >>just fine but not the data drives, basically on step 14 my old drives ...
    (microsoft.public.windows.server.clustering)