SUMMARY: Solaris 10 slow FTP



Thanks for all who replied. there was the resounding answer of duplex
autonegotiation flapping which I had thought was a Solaris problem of
yesteryear but apparently this is still around. the Solaris 8 box indeed
had the proper ndd commands and switch config. After making the same
changes to the Solaris 10 box and switchport my connection speed is much
better. The REALLY disturbing part about this is that I had tried to hard
code it to 1000fdx (since it was a gig card and switch) but the results
were the same dismal performance. I thought that gigE had to be
autonegotiated, which begs the question....
Can Solaris perform at gigE speeds?????

PS - Thanks Dean for that cool script!!

Steve O'Brien
City of Bend
Network Security Administrator
sobrien@xxxxxxxxxxxxx
541.322.6393
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



Relevant Pages

  • Re: How can my application detect the physical network problem
    ... |I have one application running on solaris and other on windows NT. ... |These two systems are connected through ethernet switch box. ... |there is some physical connection problem like wire unplugged from ...
    (comp.unix.programmer)
  • Re: 100% packet loss with new router - help!
    ... I guess sisus01 corresponds to the Solaris machine's IP address? ... You have a broken switch that switches traffic wrong. ... Your Solaris machine has a hardware problem. ... Ethernet cable. ...
    (comp.unix.solaris)
  • Re: What is a run-level in Solaris 10?
    ... but how i do switch a runlevel? ... you switch to a lower run level by using init. ... I init S on my Solaris ...
    (comp.unix.solaris)
  • Re: 100% packet loss with new router - help!
    ... >> tcpdump on the eth0 device on the Linux box, and then ping the Solaris ... > to know the Ethernet address of the Solaris box, ... > You have a broken switch that switches traffic wrong. ... > ARP request goes out, it is broadcast to all machines on the ...
    (comp.unix.solaris)
  • Need help with new E450
    ... To start with I added a 9Gb Hard drive with solaris 8 loaded added 8 ... I plugged in PGX32 and switch it on. ... There is indiacation that the fans are moving smoohly and all LED's show proper functioning ...
    (SunManagers)