HBAs have evaporated
- From: "joe fletcher" <joe_fletcher@xxxxxxxxxxxxx>
- Date: Wed, 21 Mar 2007 12:53:35 -0000
Hi,
Here's a bit of an odd one. Just built a new DL360 with Solaris10 x86 11/06.
The machine has two Emulex LP10K adapters in it. I built the machine,
installed the emulex drivers, everything is happy. We then swapped the DVD-ROM
drive used for the installation with a standard CD drive. Since then the HBAs
don't show up under solaris.
Previously the Emulex utils showed the two adapters quite happily and they
listed under cfgadm as controllers c2 and c3. Since the swap the Emulex tools
say "no adapters installed" and the c2 and c3 controllers listed under cfgadm
have gone. Hardware still sees the cards ok. Drivers are loaded ok.
Aaaanyone got any ideas?
I'm arranging to have the DVD drive swapped back (machine is in the US, I'm in
UK) but it seems a little bizarre that this would be the cause.
Cheers
Joe
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Follow-Ups:
- SUMMARY: HBAs have evaporated
- From: joe fletcher
- SUMMARY: HBAs have evaporated
- Prev by Date: SUMMARY: tapes going over ethernet instead of FC
- Next by Date: df gives strange results /dev/dsk/c3t1d0s2 67G 16384E 73G 26395259395585% /logs
- Previous by thread: SUMMARY: tapes going over ethernet instead of FC
- Next by thread: SUMMARY: HBAs have evaporated
- Index(es):
Relevant Pages
|
